In Stock Yacht for Sale | 41 Dufour Yachts Marina Del Rey, CA

CONSTRACTION

Hull: Infused polyester/glassfibre.
Decoration: Decorative stripes on the hull.
Gelcoat: NPG Gelcoat with first layer impregnated with vynilester resin forming an optimum barrier against osmosis.
Structure: Inner moulded hull bottom, structural framing laminated to the hull.
Deck: Sandwich with injected core
Ballast: Keel bolts bear on stainless back-plates
Rudder: Semi-elliptical shape, filled with closed-cell epoxy foam.
Rudder stock: Solid stainless steel.
Non-slip

DECK

DECK FITTINGS

Shroud chainplates: Outboard deck side shroud chainplates
Mooring cleats: 6 aluminum
Mooring line protection: 6 stainless steel plates, on hull sheerline
Fuel deck fillers: 1
Water deck fillers: 1
Self tacking genoa track recessed on coachroof
Vang: With quadruple-purchase tackle and cascade
Deck organizers: 4-sheave deck organizer for halyard, sheet, and reef line returns : 1 portside and 1 at starbord
2 winches on the roof to trim self tacking jib, mainsail sheet and halyard
Cleats: 2x4 jamcleats port side and starboard side of the companionway
Furler line jamcleats: 1 at aft end of sidedeck
Hatch covers: Polyester hide halyard forward of companionway

COCKPIT

Helm: Twin helm position with wheels
Helm console: Polyester POD and aluminium columns.
Engine control: “Engine controls on side of cockpit and control panel on pod”
Compasses: 1 compass on port helm position
Instrumentation: On starboard and portside helm
Gas locker: locker aft, to port
BIB locker: Locker in transom.
Shore supply: Portside
Bathing ladder: Foldaway stainless steel bathing ladder.
Cockpit floor: Non-slip polyester cockpit floor.
Emergency tiller: Head of rudder stock beneath helmsman’s floor for fitting the emergency tiller

RIGGING AND SAILS

Mast: Anodized aluminium with 2 levels of swept spreaders
Mast stepping: On deck
Lights: 3-colour masthead light + anchor light + steaming light
Topping lift: Boom topping lift cleat
Boom: Anodized aluminium fitted with 2 continuous reefers.
Furler: Genoa roller furler.
Standing rigging: Continuous in stainless single-strand cable, chrome-plated bronze rigging screws, comprising: forestay, inter. and lower shrouds.
Backstay
Running rigging: Running rigging in pre-stretched textile including: main and genoa halyards, boom topping lift, main and genoa sheets, 2 continuous reef lines, leech tensioner, furling line, downhaul tackle.
Mainsail: 2 wide reef strips, with battens and bag.
Genoa: Furling genoa with UV-protection

INTERIOR

GLAZING AND LIGHTING

COMPANIONWAY

FORWARD HEAD

AFT HEAD

SALOON

GALLEY

Worktop: Wooden fiddle.
Sink: Stainless twin-bowl sink with covers in synthetic resin
Water: Hot and cold pumped water brass single-lever mixer tap.
Gas cooker: 2-burner gas cooker with oven on gimbals, with stainless rail
Crockery storage: Dowels to retain crockery when heeling.
Cooler compressor 12V.
Refrigerator access: Via the worktop
Stowage:
2 closed cubby-holes
Below sink
Under floor.
Waste bin: Sort compartments
Other: Light and ventilation ensured by opening port-lights and led banners over galley

AFT CABINS

Port aft berth: 1600/2040cm approx.
Starboard aft berth: 1600/2040cm approx.
Mattress: 120 cm thick foam mattress with washable cover.
Fuel tank: Beneath starboard
Water tank: Beneath port berth.
Storage:
Hanging locker
Soundproofing: Double bulkhead provides acoustic and thermal insulation from adjoining engine compartment.
Technical area: Battery isolators on side of berth

STD ENGINE

PLUMBING

Water tanks: 1 polyethylene water tank with inspection holes and gauges
Electric bilge pump: With strainer, controlled from electrical distribution panel.
Manual bilge pump: Operated from cockpit.
Hot water tank: Pressurized water pump unit.
Shower waste: Shower waste pumped directly to the sea.
Other: Access to strainer via floor trap