Specs
Builder: Cabo

Dimensions
LOA: 35′
Beam: 13′
Maximum Draft: 3′
Displacement: 19,500 lbs

Engines
Engine Brand: Cummins
Engine(s) HP: 540
Engine Model: QSC 540
Cruising Speed: 27 mph
Maximum Speed: 40 mph
Engine Hours: 500

Tanks
Fresh Water Tanks: 100 gallons
Fuel Tanks: 400 gallons

• Furuno NavNet Radar/Charplotter
• Furuno GPS/WAAS Antenna
• Furuno NavNet GPS/WAAS Chartplotter
• Furuno Depth Transducer
• Furuno 526T-Hold Transducer
• Furuno Digital Depth/Temp Display
• ICOM M602 VHF/Hailer
• Shakespeare Antenna
• Simarad Autopilot System
• ACR 12V Searchlight

• Tuna Tower Molded Top, with Single Perimeter Rail
• 72″ Sunshade Tower, Arch-Style
• Sunshade: Oval route at Centerline
• 3-Sided Strataglass Enclosure
• Antenna masts, threaded, on sunshade
• Antenna standoffs, 2, on sunshade
• Flag halyards, 2, at ring or underside platform
• 72″ Fixed bench seat and Backrest at sunshade
• 50″ Control box, custom, contoured
• Compass, flush-mount on control box
• Horns: Install on tower control box
• Steering and Controls (Glendinning/electronic with trolling valves)
• One piece molded fiberglass standing platform
• Spreader lights, linear, euro-style, 2-in-1 in molded pod
• Anchor running light on mast
• Run lights, LEDNav red/green and white stern molded lights
• Radar mounting pod
• Under-hardtop lights, LED: 3 white, 1 red, with 2 dimmers
• Rigging Kit
• 1-Spreader 28′ Outrigger – Bridge Release, Aft Laydown
• 2-Outriggers – Bridge Release, Aft Laydown
• Enclosure, 3-sided, Strataglass, with (2) U-Zips
• Tower Station: Tachometers, starts/stops, trim tab controls
• Outriggers: PW, single-spreader, solid back brace, double-rigged
• Center-rigger, installed and rigged
• Outboard grab rails, port and starboard
• Cockpit Fly, with Wings and Zips
• Custom color underside: hardtop, platform and sunshade (2-tone) Ice Blue
• Grab rail, custom, portside
• Cushions, custom, removable, 2
• Enclosure: 4th Side, track to track, Strataglass
• 4 rod holders on back of hardtop
• 2 rod holders mounted on each tower leg ( total of 4)
• Enclosure, 3-sided, Strataglass, with (2) U-Zips
• Tower Station: Tachometers, starts/stops, trim tab controls
• Outriggers: PW, single-spreader, solid back brace, double-rigged
• Center-rigger, installed and rigged
• Outboard grab rails, port and starboard
• Cockpit Fly, with Wings and Zips
• Custom color underside: hardtop, platform and sunshade (2-tone) Ice Blue
• Grab rail, custom, portside
• Cushions, custom, removable, 2
• Enclosure: 4th Side, track to track, Strataglass
• 4 rod holders on back of hardtop
• 2 rod holders mounted on each tower leg (total of 4)
• Enclosure, 3-sided, Strataglass, with (2) U-Zips
• Tower Station: Tachometers, starts/stops, trim tab controls
• Outriggers: PW, single-spreader, solid back brace, double-rigged
• Center-rigger, installed and rigged
• Outboard grab rails, port and starboard
• Cockpit Fly, with Wings and Zips
• Custom color underside: hardtop, platform and sunshade (2-tone) Ice Blue
• Grab rail, custom, portside
• Cushions, custom, removable, 2
• Enclosure: 4th Side, track to track, Strataglass

• Aluminum reinforcing plate installed for mounting fighting chair
• Bait tank, 40 gallons, molded into transom
• Bait prep center, port side, includes sink/rigging board/tackle storage fitted with lid, gas spring actuator and full length piano hinge & custom latch
• Courtesy lighting under gunwales and helm deck overhang
• Cockpit coaming padding, high density foam, white vinyl covered
• Fish boxes, large capacity, insulated with macerator pumpout system
• Hatches, lazarette and fish boxes (2), heavy duty with ‘O’ ring seals/drains/gutters & full length stainless steel piano hinges
• Hose & pistol grip nozzel supplied
• Ice box, starboard side fitted with gasketed lid/gas spring actuator/stainless steel piano hinge
• Rod-gaff racks, port & starboard
• Rod holders (5)
• Self bailing cockpit scuppers
• Transom door with top gate, extreme duty polished stainless steel hardware
• Washdown – freshwater
• Washdown – saltwater

• Cummins QSC 8.3, 540hp commonrail engines
• 5 year Cummins extended warranty’s
• Fuel filters with water seperators on main engines & generator
• Oil change system, mains and generator
• Fuel lines are metal braided & fire retardant
• Fuel tank is fiberglass, fire-retardant vinylester resin
• Helm deck has marine grade hydraulic lift system
• PropSmith propeller tool
• Trolling valves
• Holding tank, 16-gal with monitor, macerator and dockside discharge
• Mufflers, fiberglass with backwash surge tube
• Propeller shafts, double taper, couplers, high-strength stainless steel
• Propellers, 4-blade Nibral
• Steering system, hydraulic, Teleflex-Seastar
• Rudders, bronze, high-strength, with high load bearings (low friction, precise control)
• Sea cocks, UL approved for marine application, bronze, fitted on all thru-hulls below waterline
• Stuffing boxes, drip-less lip seal type
• Water heater, 11-gallon, AC, stainless steel
• Water intake scoops, bronze, high-speed, with integral seawater strainers
• High water bilge alarms
• 4 Bilge pumps with 3 being automatic/1 manual
• Electronic controls with engine synchronizer
• Engine alarm system
• Engine hour meter (per engine)
• Engine room lighting, DC halogen
• Battery charger, 70amp automatic with thermal cut out
• Battery on/off switches, vapor proof
• Automatic battery paralleling with backup switch at helm
• Batteries (5)
• Bonded electrical system

• Canvas console cover
• Compass with light, flush mounted
• Complete custom engine instrument panel with audible warning system
• Custom switch panels, stainless steel
• Fire & bilge water level alarms, audible
• Stainless steel helm wheel

• Custom outdoor helm deck carpet
• Engine access hatch with gas spring
• Helm console, integrally molded
• Helm sea, bench style, adjustable foot rest
• “L’ shaped lounge port side with rod storage
• Molded fiberglass helm deck, hydraulically lifted with cockpit control unit
• Safety cabinet with first aid kit & fire extinguisher
• Sliding companionway door, opaque white acryclic panelling
• Storage cabinet at helm
• Tackle center with 6 drawers to store & organize gea

• AC duplex outlet/GFI protected
• Ceramic cook top, one burner, recessed with Fossil colored Corian cover
• Fossil Corian counter top with custom Corian sea rails
• Counter top lighting, recessed halogen (3)
• Microwave/convection oven
• Positive latches used on cabinet doors & drawers
• Side by side refrigerator/freezer, AC/DC
• Sink, deep single, molded in
• Storage comparments & drawers throughout

• AC duplex outlet/GFI protected
• Access to anchor rope locker
• Access hatch to bilge
• Air conditioning/heat including extra shore power, 10,000 BTU capacity
• Diagonal double bed portside with 5″ mattress, coverlets
• Designer interior, high quality
• Foredeck hatch with retractable shade
• Handing locker, starboard side
• Interior wood – teak superbly joined and finished in satin varnish
• “L” shaped lounge converts to upper & lower sleeping berths
• Lighting – recessed halogen (6)
• Opening ports (3)
• Port & starboard rod storage locker for up to 8 rods with #50 wide reels
• Positive latches used on cabinet doors & drawers
• Recessed halogen lights (4)
• Removable deep pile carpet
• Stereo AM/FM/CD
• Storage comparments & large drawers below bed
• Upholstered dressing sea

• AC, duplex outlet/GFI protected
• Fossil Corian counter top, custom
• Custom vanity
• Head, Sealand Vacuflush electric
• King starboard framed mirror
• Opening port
• Positive latches used on cabinet doors & drawers
• Recessed halogen lighting, DC
• Seperate stall shower with automatic shower sump pump
• Toiletry storage cabinet, Corian framed with sliding mirror door
• Verticle rod storage rack in head for 3 rods

• Access to anchor rope locker
• Deck hatch, opening with screen and sun shade
• Offset double berth with storage below
• Positive latches used on cabinet doors & drawers
• Recessed halogen lighting
• Rod storage cabinets port & starboard, total 8 rods

• Bow chocks, 6″ stainless steel
• Bow cleats, 12″ stainless steel
• Bow pulpit, integral molded fiberglass
• Stern cleats, 12″ stainless steel
• Stern hawes pipes, stainless steel
• Windlass, heavy duty DC electric for rope & chain with remote from bridge & deck switches
• Custom deck rails, highly polished stainless steel
• Molded fiberglass using polyester resin, bi-axial stitched fabric reinforced & core construction
• Molded-in non-skid surface
• Premium quality molded-in white gelcoat finish
• Recessed custom stainless steel anchor roller assembly
• Spring line cleats, 12″ stainless steel
• Windshield washers, (3) wet arms
• Windshield wipers (3), self parking with heavy duty pantograph arms with inermittent & seperate controls
• Windshield with side vents, heavy duty welded aluminum construction finished in a whitle polyurethane paint
• Includes weather return on top rail & electrically actuated center vent

• Boot striping
• Bottom paint, complete preparation – 2 coats epoxy, 2 coats anti-fouling paint, black standard
• Premium quality molded-in white gelcoat finish
• Stainless steel rub strip on face of white high density PVC rub rail
• Molded fiberglass construction with superior ISO/NPG gelcoat finish & premium vinylester resins throughout bi-axel stitched fabric reinforcement. Solid fiberglass bottom construction. Core construction from chine to shear
• Trim tabs, fully recessed

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.