35 J Boats 2009 Boat for Sale

• Two Tone Deck
• Wheel Package
• Opening ports in the aft face of coach roof
• Opening ports in the main cabin

• Interior built using wood, laminated or solid.
• All wooden parts are varnished or laminated with white Formica.
• Cabin sole in plywood laminated with teak and holly effect Formica
• Vinyl lined ceilings throughout, but main saloon which has moulded slats on hull sides

FORWARD CABIN

• Large hanging locker on port side, storage on starboard
• Forward large double v-berth with storage underneath
• Shelve above berth on port side
• Access door to saloon

MAIN SALOON

• Settee/berths to starboard and port side with lift up pilot berths both sides.
• Water tank under starboard berth
• Table with drop leafs and bottle storage in the centerline
• Large storage lockers behind backrests
• S/s hand rail on ceiling

CHART TABLE (on starboard side)

• Large chart table facing forward with:
• Charts storage under table lid
• Locker under chart table
• Shelf
• Vinyl Nav. Seat cushion with backrest
• Large hinged instruments panel, outboard, with electrical panel

AFT CABIN (on port side)

• Access door to saloon
• Large hanging locker
• Changing seat
• Double berth
• Access panel to engine
• Fuel tank under berth

AFT HEAD (on starboard side)

• Access door to saloon
• Integral 2nd moulding for easy maintenance with integral shower tray, sink, access to valves and toilet support shelf
• Pressurised cold water
• Marine toilet
• Mirror, toilet roll holder and towel rail
• Vanity unit
• Shower grating
• Access door to cockpit storage
• Holding Tank

COMPANIONWAY

• White Formica finish for better wear resistance
• Steps with angled treads between bulkheads
• Handrails integrated in bulkheads
• Main engine access through lifting panel
• Open locker

• Gimballed Propane stove with oven and 2 burners
• S/S double sink
• Pressurized cold water
• Large 90 litres moulded icebox/fridge with 12 volt compressor
• Full length locker outboard of galley countertop
• Cold moulded fiddles around the edge of the countertop
• Storage under sink with shelf and space for trash bin
• Drawers

• Manual bilge pump in cockpit
• Automatic/manual electric bilge pump with float switch
• Pressurized water system
• 1 water tank (96 litres) under starboard berth in saloon
• Ice box drain
• Marine toilet
• 12V electric panel with fuel gauge and voltmeter
• Halogen lights on ceilings and swivelling tulip lights in cabins
• Ceiling light in head
• Light in cockpit locker
• Navigation lights on pushpit and pulpit, steaming light and mooring light
• Rig grounded for protection against lightning

• Volvo D1-30 Inboard diesel 30 HP with Saildrive, 115 AH alternator, with double diode and fresh watercooling with heat exchanger
• Engine panel recessed in the cockpit with plexi-glass protection including rev. counter, hour meter and alarms for oil pressure, low voltage and water temperature
• 85 litres (18.5 gallons) fuel tank under aft cabin berth
• Sound insulated engine compartment, ventilation pipes to the transom
• 2 bladed folding propeller
• 2020 Sail Drive Seal
• 2022 Water Pump

• Baltek Contourkore end grained balsa composite construction using biaxal and unidirectional glass with vinylester resin on the outer hull layer for 10 year warranty against hull blisters
• Patented SCRIMP resin infusion system moulding process for optimum laminate strength
• 3,883 lbs (1.760 kg), 7' draft, variable chord, high lift, lead keel bolted and bonded, bolted and laminate to deep moulded stub with sump
• Off-white deck with a high traction non-skid
• White hull. Single tapered gel coat integrated double boot stripe
• 2024 Keel
• 2024 Rudder Bearings

• Foredeck and helmsman moulded toe rails
• Large bow locker with laminated watertight forward collision bulkhead
• Large cockpit storage locker on starboard
• Propane bottle storage
• Moulded stern platform with removable swimming ladder
• Moulded spray shield with dodger storage and companionway instrument pod
• GRP moulded structural bulkhead bonded to hull and deck
• All intermediate bulkheads glassed to hull and deck for stiffness
• Heavy-duty fibreglass floor stringer grid infused into hull, including mast and chain plate structure
• Balanced spade rudder construction using biaxal and unidirectional glass and large diameter anodised aluminium stock mounted in JP3 self-aligning bearings

DECK HARDWARE

• 2 Harken 46 STA (self-tailing) primary winches
• 2 Harken 40 STA (self-tailing) halyard winches
• 3 Aluminium lock-in winch handles, 1 being ?speed grip? type
• 2 PVC handle holders
• Mainsheet purchase on Harken ball bearing blocks and fine tune
• Harken adjustable mainsheet traveller with 4:1 purchase led to a cleat on both sides
• Harken ball bearing genoa and jib tracks with 4:1 car controls led to cleats by coach roof
• Harken foot blocks for genoa sheets
• Harken spinnaker sheet blocks on U-bolts
• Harken block on pad-eye at bowsprit end
• 5 halyard/reef turning blocks
• Halyards lead aft through 2 quadruple organisers and 4 spinlock XT stoppers on each side of companionway
• Tack line led aft to stopper on starboard side of coach roof
• Bowsprit control line leading to a cam cleat on aft of coach roof bulkhead
• 2 bow mooring cleats
• 2 stern mooring cleats
• Stem head fitting
• Custom s/s stem plate with tack fitting, removable anchor roller
• S/S chain plates for shrouds and backstay
• Foredeck opening hatch (500 x 500) with vent
• Opening hatch (450 x 320) over main saloon
• 4 fixed ports (630 x 170) on saloon coach roof sides
• 2 opening ports (304 x 155) for aft cabin and toilet compartment
• 1 opening port (350 x 170) in cockpit (aft cabin)
• 1 vent above toilets
• 3 line bags
• 2 s/s handrails on coach roof
• S/S pushpit and pulpit
• Double s/s lifelines, 8 stainless stanchions, 4 with reinforcing leg
• Aluminium wheel (4.16 ∅) with natural leather grip on custom moulded pedestal with 5?? compass, brake and stainless guard
• Emergency tiller
• Plexi-glass companionway washboards with lock and ventilation grid
• Door storage rack in cockpit locker
• Flag staff holder

• Sparcraft tapered aluminium mast with double airfoil spreader clear anodised
• Continuous Rod rigging (Nitronic 50)
• Sailtec hydraulic backstay adjuster
• Sparcraft boom with internal outhaul 8:1 purchase system, mainsail reef line sheaves, main sheet and rigid vang tangs
• Harken jib furling system unit 1
• Retractable carbon fibre bowsprit (extendible to 5.5? (1.70 m) beyond the bow) with seal
• Nautos solid Boomvang with cascade purchase system
• 1 spectra main halyard
• 1 spectra jib halyard
• 1 pre-stretched polyester spinnaker halyard with snapshackle
• 2 spinnaker sheets
• 1 tack line
• 2 jib sheets
• 1 main sheet with fine tune
• Mainsheet traveler control lines
• 1 bowsprit control line
• 2 reef lines

Sails:

• 2022 Quantum Main
• 2022 Quantum Genoa
• 2023 Z Sails Cruising jib with cover
• 2024 Quantum Spinnaker
• Various older sails including 4 spinnakers, one Jib and one Ullman Mainsail.

I : 46.42 ft

J : 13.25 ft

P : 43.25 ft

E : 15.42 ft

Working Sail Area : 644.00 sq ft

Canvas:

• Fairclough Winter Cover
• 2024 Dodger and cockpit cover for cruising

2026 New Axiom 9 inch plotter 

2026 New Evolution  autopilot computer and control head.

2026 Alpha mast display

2026 2 new raymarine tri data displays