31' J Boats 2016

Gilford, NH

$187,900

Watch Price

Yacht Overview

  • Yacht Details 31' J Boats 2016
  • Location Gilford, NH
  • Engines Yanmar
  • Days on MarketInquire
  • Last UpdatedMar 9, 2020
  • Asking Price$187,900
Price Watch


Sending your Message. Please wait . . .

Have a question about this yacht?

Yacht Description

PRICE JUST REDUCED

This J 95 is a rare find, a nicely equipped fresh water used J 95. The boat has been sailed only on Lake Winnipesaukee, with its its short seasons, and crystal clear water. The boat has been very lightly used, is well equipped, and found in perfect condition. The only way to find a a J 95 in better condition, would be to find a new one. The boat has only been sailed 3 years, and never raced. This is a unique find.

Show more

Engine(s)



  • Make Yanmar
  • Model 2YM 15
  • Fuel Diesel
  • Hours 26
  • Type Inboard
  • Drive Type Direct

Specifications

  • Beam: 10' 2''
  • Hull Material: Fiberglass
  • Fuel Tank: 1 x 15|gallon
  • Fresh Water: 1 x 12|gallon
  • Heads: 1

Sails


- North Mainsail NorDac Radian 6.0 with standard reefs, Full Battens, Batten cars, Harken Headboard carriage, with intermediate slider cars.

-North Furling Jib, with Battens, NorDac Radian NDR 6.0 , with UV Leach and vertical Battens. Jib Sock

Spars And Rigging


  • Hall Spars tapered Carbon mast, with double airfoil spreaders, main, jib and spinnaker halyard sheaves, Harken Type A mast track
  • Asy Spinnaker Package
  • Mast finished in White Awlgrip
  • G10 fiberglass mast step with fore/aft adjustment slots and SS padeye for through bolt securing of mast to step
  • Mast Wedge
  • Aluminum boom with provision for 2 reefs, 8:1 internal mainsail outhaul in Awlgrip off-white
  • Continuous rod rigging with adjustable shroud turnbuckles
  • Running rigging package with main halyard, jib halyard, two jib sheets, main sheet, single line reef, traveler control lines, and centerboard pennant and control line
  • NavTech hydraulic backstay adjuster
  • Rigid boomvang with purchase
  • Harken MK IV Unit 0 headsail furler with control leading aft through 2 fairleads to Harken 150 cam cleat mounted on port cabin side
  • Bowsprit package with internal fiberglass sprit tube installed with flush cover
  • Optional asymmetric spinnaker gear package installed including carbon sprit, bearings, retrieval purchase, blocks and running rigging and snuffer system

Deck Hardware


  • Moondust Two Tone Deck
  • Low maintenance custom stainless handrails on cabin house
  • (2) Harken 40.2STA 2 speed self-tailing winches mounted on cockpit coamings
  • (2) Harken 32.2A, 2 speed self-tailing winches mounted beside companionway
  • Triple Harken deck organizers
  • Harken Adjustable Genoa Track System
  • 6 Harken mast collar turning blocks
  • Spinlock XTS triple rope clutches
  • Floor mounted Harken mainsheet traveler track with 4:1 Harken traveler control system leading to cockpit vertical wall to Harken 150 cam cleats
  • 5:1 Harken mainsheet system leading to Harken 144 swivel cam base on a custom SS riser mounted on centerline aft of the traveler
  • 10:1 fine tune adjustment system
  • Interior ventilation from two framed BSI Moonlight opening ports in sides of cabin trunk and offshore style forward skylight deck hatch above V-berth. Optional two aft facing opening ports installed
  • Companionway opening with SS covered PVC slider tracks, large gutter drains, molded seahood with sliding cover
  • Acrylic offshore removable dropboard in aluminum frame with inside/outside lockable hasp
  • Cockpit operated manual bilge pump operable from the helm position with SS transom exhaust fitting
  • Two polypropylene mesh line bags for halyard and sheet line tail storage
  • Custom designed and fabricated SS chainplates, stemhead and backstay fittings
  • Four (4) folding padeyes for attachment points of spinnaker blocks
  • Custom SS bow and stern rails with Perko integral navigation lights
  • SS removable stanchions with double lifelines PandS and at transom
  • Custom SS Pedestal Guard Option Installed
  • Opening Ports in Aft Face of Cabin Option Installed

Keel And Rudder


  • Fixed 2,250 lb lead keel bolted and bonded to shallow molded sump in hull

  • Pivoting 200 lb. cast bronze centerboard

  • Fully removable centerboard shim system assembly with custom SS plates, pivot pin, and mechanically fastened UHMW shim plates

  • Centerboard lifting system with Spectron Pennant from Hall Rigging, 6:1 Harken purchase leading through the deck to the cockpit for an adjustable sailing draft between 3? and 5' 6"

  • Interior access port to centerboard lifting components within head area

    Balanced twin rudder system with self-aligning rudder bearings and SS rudder shafts

  • Edson steering components including bulkhead steerer, radial drive, tiller arm, link bar, articulock idler sheaves and wire chain assembly

  • 44" leather covered wheel mounted on custom molded steering pedestal

  • Ritchie binnacle mounted compass and custom fabricated SS wheelguard/handhold

  • Custom fabricated emergency tiller

  • Custom Binnacle Covers

Accommodations


  • Off White main bulkhead with varnished teak trim, teak oval door opening with white door
  • Teak and holly synthetic high-wear cabin sole in main cabin and head
  • Teak trimmed storage bins outboard of each settee berth seat back
  • Raritan PH-II marine head with 14 gal holding tank and "Y" valve
  • Molded sink with overboard drain in head
  • Settee cushions with piping
  • Vinyl liner finish on main cabin and head overhead and main cabin hull sides.
  • Air dry gelcoat finish on hull sides in head and V-berth area and aft storage lockers
  • Manual Fresh Water System

Engine And Steering


  • 2 Cylinder 14 HP Yanmar engine with saildrive and 15" Flex-O-Fold geared folding propeller
  • Yanmar engine instrument panel with tachometer, engine hour gauge and water, oil pressure alarms and separate fuel gauge in cockpit with acrylic splash cover
  • Engine throttle control with neutral safety switch
  • Waterlock muffler with exhaust run aft to SS transom exhaust fitting
  • 15 gal fuel tank with baffles and inspection port
  • Balanced twin rudder system with self-aligning JP-3 rudder bearings and rudder shafts
  • Edson steering components including bulkhead steerer, radial drive, tiller arm, link bar, articulock idler sheaves and wire chain assembly
  • 44" leather covered Edson destroyer wheel mounted on custom molded steering pedestal
  • Ritchie binnacle mounted compass and custom fabricated SS wheel guard/handhold

Canvas


-Thuston Mainsail Cover

-Thurston Dodger with Side Curtains

-Jib Sock

-Binnacle and Wheel canvas cover

-Full Custom winter Cover

Instruments


-Raymarine Wind Speed, Wind Direction

-Raymarine Depth, Speed,

-Raymarine Chartplotter, Nav system, with fusion Stereo integrated.

-Fusion Stereo System with 100W Cabin Speakers, and Cockpit 6.5" marine speakers

Disclaimer

Denison Yacht Sales offers the details of this yacht in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of this boat for sale. A yacht buyer should instruct his yacht broker, or his boat surveyors, to investigate such details as the buyer desires validated. This yacht for sale is offered subject to prior sale, price change, or withdrawal without notice. Denison Yachting is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Fay's Boat Yard, Inc..

Map




Call Call
Call Email