32 Pursuit 2018 Boat for Sale

Hull Features

• Pursuit® Protection Plan:
  5-year hull/deck structural warranty
  5-year blister-free warranty
  2-year limited warranty
• Hand laminated hull with vinyl ester resin and
  engineered fabrics
• Infused fiberglass structural grid system with molded finish and integrated bilge water management system
• 5 ply resin infused composite transom system with patented transom reinforcement grid
• Integrally molded thru-stem anchor system with fresh and raw water washdown
• Horizontal anchor windlass with switch at helm and remote
• 316L stainless steel delta plow style anchor, twist shackle, chain and 200’ of 1/2” rode
• 316L stainless steel through stem anchor roller with 8” mooring cleat, chain binder and aluminum backing plates
• 3.0 HP bow thruster with group 31 AGM battery
• Trim tabs with indicator lights and auto-retract
• Bronze thru hull fittings below water line
• Chrome over bronze thru hull fittings below 7º heel line
• Stainless clad composite thru hull fittings above the 7º heel line
• Bronze garboard drain
• Integrated transom platforms extensions outboard of engines
• 4 step telescopic boarding ladder mounted in hull platform
• Forward hull compartmentation with one (1) 1100 GPH bilge pump with automatic float switch
• Dedicated transducer location
• High density PVC rubrail with solid 316L stainless steel insert
• ½“ 316L stainless steel bow eye

Deck and Cockpit Features

• Molded one piece deck and cockpit liner with non-skid pattern area and overboard drains
• Hull and deck joint mechanically fastened
• 10” Pop up cleats (2) on stern and 10” hershoff cleats spring and bow (4)
• Molded recessed hatches with gaskets and 316L stainless steel latches and overboard drain tracks
• Flush mounted integral anchor locker with fiberglass lid
• 1 1/4” welded 316L stainless steel foredeck grab rail with 1’ stanchions
• 316L stainless steel deck plates for water and waste
• Four (4) 316L stainless steel rod holders in gunwale with (2 two drink holders
• Under gunwale rod storage, port and starboard
• Molded transom walkthrough and hinged HDPE transom door with 316L stainless steel latch and positive catch
• Molded non-skid steps in splashwell for athwartship access
• Port and starboard 316L stainless steel transom grab rails
• Custom cockpit upholstery with dri-fast foam and mesh backing
• Captain’s chair with swivel base, foldable armrests, fore and aft adjustment
• Molded port bridge lounge seating with molded footrest and equipment storage area
• Pursuit cockpit entertainment system: 12V bluetooth® compatible stereo system, premium speakers (7 total, 4 in hardtop, 2 interior & subwoofer), amplifier and remote at helm
• Molded entertainment center with molded sink, hot/cold mixing faucet, cutting board, dedicated storage, 120v outlet with GFI protection and hinged fiberglass lids/doors
• Lighted oceana blue 24 gallon recirculating livewell with dedicated bronze strainer and overboard discharge
• Cockpit tackle center with lure tube, tackle tray and bucket storage
• Molded aft facing seat with insulated storage below
• Folding transom seat with patented adjusting backrest
• 316L stainless steel bridge, cockpit and helm drink holders
• Port and starboard insulated fishboxes
• Cockpit machinery access hatch
• Fresh water wash with hot/cold mixing valve and pull-out sprayer located at transom door
• Raw water outlet in cockpit with quick connect fittings and 25’ hose
• Led cockpit accent lights (6) with water proof switch in cockpit
• Port and starboard 2 mile LED navigation lights

Aft Berth

• Aft full size berth with 3” foam mattress and quilted cover
• 316L stainless steel opening port light with screen
• Overhead rod storage for 4 rods
• Hanging locker with LED light
• Two switch panel with overhead LED lights (4) LED floor accent light (1)
• Hinged closeout panel for machinery access, starboard

Interior Cabin

• Molded acrylic access door with gasket, 316L stainless steel locking latch
• Cabin entry steps with handrail and wood treads
• Molded cabin hull liner with custom wood floor accents, mechanical access, drainage and sound damping insulation
• Molded cabin deck liner with sound damping insulation
• Custom v-berth seating that converts into berth with storage space below. Solid wood table with adjustable, gas-assisted table base.
• Pursuit Digital Media Ready Entertainment Center with 19” LED TV
• Flush mounted opening foredeck hatch with screen
• 316L stainless steel opening port lights (2) with screen
• Premium stereo speaker (2)
• Four switch panel with overhead LED lights (2), reading lights (2) and LED floor accent light (2)
• CO monitor

Galley (Port)

• Corian® galley counter top
• Molded sink with cutting board cover, overboard drain and stainless clad composite thru hull fitting
• Pressurized hot/cold mixing valve and faucet
• Galley under-counter storage with drawers, dedicated storage, positive latches, and trash can
• Galley pantry cabinet with storage shelves and wood keepers
• Galley upper cabinets storage with doors
• 316L stainless steel towel holder
• 12V, 1.9Ft3 stainless steel refrigerator
• 12V LED overhead light (2)
• 12V Outlets (2) and dual USB charger (1)
• 120V single burner glass cook top with touch controls and pop-up pot holders
• 120V 1.1 Ft3 stainless steel faced microwave oven
• 120V outlet with GFI protection (1)
• Fire extinguisher
• 316L stainless steel opening port light with screen

Head (Starboard)

• Fiberglass enclosed head compartment with non-skid pattern area
• Custom 1 1/4” wood framed entrance door with custom latch
• Designer sink with Corian® countertop, vanity mirror and pull-out shower wand
• Vanity storage cabinet with shelves
• Overhead storage cabinet with shelf and dual mirrors
• Vacuum flush marine head with 18 gallon holding tank, macerator discharge pump, deck pump-out fitting and bronze through hull fitting
• Fiberglass toilet seat cover
• Shower curtain
• 316L stainless steel opening port light with screen
• Vanity storage cabinet with shelves
• Toilet tissue holder
• Grab rail/towel rack
• Shower sump box drain with automatic discharge stainless clad composite thru hull fitting
• Two switch panel with overhead LED lights (2) LED floor accent light (1)
• 120V outlet with GFI protection (1)

Hardtop

• Molded fiberglass hardtop integrated visor
• Aft structural hardtop supports with (4) rod holders
• Custom windshield system with laminated windshield glass, tempered side glass with fiberglass frame and electrically actuated center vent window
• Optically clear, laminated, one-piece forward windshield glass, tempered side glass with fiberglass frame and electrically actuated center vent window
• Exalto series heavy duty pantographic windshield wiper system
• Combination anchor/stern LED all-around navigation light
• Four (4) tri color LED lights
• Aft facing LED spreader light
• 316L stainless steel fore/aft underside grab rails
• Powder coated aluminum fore/aft topside grab rails
• 60 Mil stratoglass side curtains
• Integrated stereo speakers (4)
• Electric oval horn with stainless steel cover
• Integrated overhead glovebox
• Integrated life jacket (4) storage with stamoid cover
• Port and starboard bomar hatches with screens

Helm

• Molded fiberglass aft tilting helm with instrumentation visor, electronics mounting surface, fold out fiberglass foot rest/standing platform and safety lanyard
• Teleflex tilt sport helm
• 316L stainless steel steering wheel with textured grip and control knob
• 12V switch panel
• Single windshield wiper with washer control
• Port and starboard windshield wiper with washer control
• Compass
• Trim tab control panel and indicator
• Waterproof stereo remote
• 316L stainless steel grab rail
• One 12V outlet (1) and dual USB charger (1)
• Helm fire extinguisher

Electrical Systems

• UL® rated fully tinned, color coded copper wire
• custom built, heat sealed, mechanically crimped, color coded battery cables
• Custom built, one piece electrical harness with water proof connectors and chafe protection
• Powder coated, aluminum, screen printed (front and back) main breaker panels
• Bonding system: thru hull fittings below water line, trim tabs, zinc anode and garboard drain
• 120V 30 amp 60 cycle dockside power connection
• 120V 30 amp 50’ dockside power cord
• Three 120V outlets with GFI protection (3)
• Three 12V outlets (3) and two dual USB chargers (2)
• One 40 AMP battery charger for house, electronics and bow thruster
• One 20 AMP battery charger for engine cranking batteries
• Five battery system: port engine (1) starboard engine (1), AGM house (1), AGM bow thruster (1), and AGM electronics (1)
• One grounding bus bar
• Electronics fuse block
• Isolation transformer

Mechanical Space

• Molded interior white gel coat
• Molded hatch with gasket and stainless steel gas spring
• Molded bilge sump area
• Two 1500 GPH bilge pumps with one automatic float switch, one high water float switch and alarm with stainless steel clad composite thru hull fittings
• Fresh water pump with filter
• Raw water pump with bronze sea strainer, sea cock and thru hull fitting
• Livewell cyclone pump with bronze sea strainer
• Fishbox evacuation pump with dedicated valves

Fuel System

• 316L stainless steel extension arms for remote hullside ball valve operation
• EPA Compliant lined 300 gallon rotomolded fuel tanks with engine pickups, shutoff valves and digital level indicator.
• Custom built fuel lines with mechanically crimped fittings
• Two Yamaha® water separating fuel filters with primer bulbs

Water System

• 30 gallon water tank
• Custom built reinforced color coded water hose
• Pressure sensing pump
• Dockside fresh water inlet with pressure regulator
• 120V/60 cycle 6 gallon stainless steel hot water heater
• Cockpit shower with hot/cold mixing valve