35 Pursuit 2016 Boat for Sale

Layout & Accommodations

The OS 325 features a highly functional deck layout designed for both fishing and entertaining.

The cockpit offers ample fishing space, equipped with dual in-deck fish boxes and fold-away transom seating that easily converts the area from a fishing platform to a social space. An aft-facing jumpseat with a cooler plate allows for a nice drink cooler.

A well-appointed grill and prep station further elevates the boat’s entertaining capabilities, making her equally suited for sandbar days or offshore trips.

At the helm, wraparound seating provides comfort for guests, while the entire helm can be fully enclosed and air-conditioned, delivering protection from the elements and year-round usability.

Below deck, the cabin is impressively spacious for a vessel in this class. A forward V-berth converts into a dinette, complemented by a full-beam aft berth, providing sleeping accommodations for multiple guests. The galley includes a microwave, single-burner cooktop, and refrigerator, and the enclosed head offers convenience for extended outings.

Performance & Helm

The twin Yamaha 300s provide strong and efficient performance, making the OS 325 a capable offshore runner.

Cruise:   24 mph        4000 rpm         26 gph total

WOT:     48 mph        5700 rpm         56 gph total 

The helm is equipped with:

• Dual Simrad multifunction displays
• Yamaha engine display
• Lewmar bow thruster control
• Trim tab controls
• Integrated air conditioning vent

The layout is clean, intuitive, and designed for ease of operation whether running solo or with guests onboard.

Exterior & Condition

This vessel shows exceptionally well thanks to her indoor storage history. The new Flag Blue hull paint gives her a striking, modern appearance, while updated SeaDek enhances both aesthetics and functionality.

From bow to stern, she presents as a clean, well-kept, and highly upgraded example of the model.

Exclusions

Seller’s exclusion list to be provided upon request.

Hull Features

• Pursuit® Protection Plan:
  5-year hull/deck structural warranty
  5-year blister-free warranty
  2-year limited warranty
• Hand-laminated hull with vinyl ester resin and
  engineered fabrics
• Infused fiberglass structural grid system with molded finish and integrated bilge water management system
• 5 ply resin infused composite transom system with patented transom reinforcement grid
• Integrally molded thru-stem anchor system with fresh and raw water washdown
• Horizontal anchor windlass with switch at helm and remote
• 316L stainless steel delta plow style anchor, twist shackle, chain and 200’ of 1/2” rode
• 316L stainless steel through stem anchor roller with 8” mooring cleat, chain binder and aluminum backing plates
• 3.0 HP bow thruster with group 31 AGM battery
• Trim tabs with indicator lights and auto-retract
• Bronze thru hull fittings below water line
• Chrome over bronze thru hull fittings below 7º heel line
• Stainless clad composite thru hull fittings above the 7º heel line
• Bronze garboard drain
• Integrated transom platforms extensions outboard of engines
• 4 step telescopic boarding ladder mounted in hull platform
• Forward hull compartmentation with one (1) 1100 GPH bilge pump with automatic float switch
• Dedicated transducer location
• High density PVC rubrail with solid 316L stainless steel insert
• ½“ 316L stainless steel bow eye

Deck and Cockpit Features

• Molded one piece deck and cockpit liner with non-skid pattern area and overboard drains
• Hull and deck joint mechanically fastened
• 10” Pop up cleats (2) on stern and 10” hershoff cleats spring and bow (4)
• Molded recessed hatches with gaskets and 316L stainless steel latches and overboard drain tracks
• Flush mounted integral anchor locker with fiberglass lid
• 1 1/4” welded 316L stainless steel foredeck grab rail with 1’ stanchions
• 316L stainless steel deck plates for water and waste
• Four (4) 316L stainless steel rod holders in gunwale with (2 two drink holders
• Under gunwale rod storage, port and starboard
• Molded transom walkthrough and hinged HDPE transom door with 316L stainless steel latch and positive catch
• Molded non-skid steps in splashwell for athwartship access
• Port and starboard 316L stainless steel transom grab rails
• Custom cockpit upholstery with dri-fast foam and mesh backing
• Captain’s chair with swivel base, foldable armrests, fore and aft adjustment
• Molded port bridge lounge seating with molded footrest and equipment storage area
• Pursuit cockpit entertainment system: 12V bluetooth® compatible stereo system, premium speakers (7 total, 4 in hardtop, 2 interior & subwoofer), amplifier and remote at helm
• Molded entertainment center with molded sink, hot/cold mixing faucet, cutting board, dedicated storage, 120v outlet with GFI protection and hinged fiberglass lids/doors
• Lighted oceana blue 24 gallon recirculating livewell with dedicated bronze strainer and overboard discharge
• Cockpit tackle center with lure tube, tackle tray and bucket storage
• Molded aft facing seat with insulated storage below
• Folding transom seat with patented adjusting backrest
• 316L stainless steel bridge, cockpit and helm drink holders
• Port and starboard insulated fishboxes
• Cockpit machinery access hatch
• Fresh water wash with hot/cold mixing valve and pull-out sprayer located at transom door
• Raw water outlet in cockpit with quick connect fittings and 25’ hose
• Led cockpit accent lights (6) with water proof switch in cockpit
• Port and starboard 2 mile LED navigation lights

Aft Berth

• Aft full size berth with 3” foam mattress and quilted cover
• 316L stainless steel opening port light with screen
• Overhead rod storage for 4 rods
• Hanging locker with LED light
• Two switch panel with overhead LED lights (4) LED floor accent light (1)
• Hinged closeout panel for machinery access, starboard

Interior Cabin

• Molded acrylic access door with gasket, 316L stainless steel locking latch
• Cabin entry steps with handrail and wood treads
• Molded cabin hull liner with custom wood floor accents, mechanical access, drainage and sound damping insulation
• Molded cabin deck liner with sound damping insulation
• Custom v-berth seating that converts into berth with storage space below. Solid wood table with adjustable, gas-assisted table base.
• Pursuit Digital Media Ready Entertainment Center with 19” LED TV
• Flush mounted opening foredeck hatch with screen
• 316L stainless steel opening port lights (2) with screen
• Premium stereo speaker (2)
• Four switch panel with overhead LED lights (2), reading lights (2) and LED floor accent light (2)
• CO monitor

Galley (Port)

• Corian® galley counter top
• Molded sink with cutting board cover, overboard drain and stainless clad composite thru hull fitting
• Pressurized hot/cold mixing valve and faucet
• Galley under-counter storage with drawers, dedicated storage, positive latches, and trash can
• Galley pantry cabinet with storage shelves and wood keepers
• Galley upper cabinets storage with doors
• 316L stainless steel towel holder
• 12V, 1.9Ft3 stainless steel refrigerator
• 12V LED overhead light (2)
• 12V Outlets (2) and dual USB charger (1)
• 120V single burner glass cook top with touch controls and pop-up pot holders
• 120V 1.1 Ft3 stainless steel faced microwave oven
• 120V outlet with GFI protection (1)
• Fire extinguisher
• 316L stainless steel opening port light with screen

Head (Starboard)

• Fiberglass enclosed head compartment with non-skid pattern area
• Custom 1 1/4” wood framed entrance door with custom latch
• Designer sink with Corian® countertop, vanity mirror and pull-out shower wand
• Vanity storage cabinet with shelves
• Overhead storage cabinet with shelf and dual mirrors
• Vacuum flush marine head with 18 gallon holding tank, macerator discharge pump, deck pump-out fitting and bronze through hull fitting
• Fiberglass toilet seat cover
• Shower curtain
• 316L stainless steel opening port light with screen
• Vanity storage cabinet with shelves
• Toilet tissue holder
• Grab rail/towel rack
• Shower sump box drain with automatic discharge stainless clad composite thru hull fitting
• Two switch panel with overhead LED lights (2) LED floor accent light (1)
• 120V outlet with GFI protection (1)

Hardtop

• Molded fiberglass hardtop integrated visor
• Aft structural hardtop supports with (4) rod holders
• Custom windshield system with laminated windshield glass, tempered side glass with fiberglass frame and electrically actuated center vent window
• Optically clear, laminated, one-piece forward windshield glass, tempered side glass with fiberglass frame and electrically actuated center vent window
• Exalto series heavy duty pantographic windshield wiper system
• Combination anchor/stern LED all-around navigation light
• Four (4) tri color LED lights
• Aft facing LED spreader light
• 316L stainless steel fore/aft underside grab rails
• Powder coated aluminum fore/aft topside grab rails
• 60 Mil stratoglass side curtains
• Integrated stereo speakers (4)
• Electric oval horn with stainless steel cover
• Integrated overhead glovebox
• Integrated life jacket (4) storage with stamoid cover
• Port and starboard bomar hatches with screens

Helm

• Molded fiberglass aft tilting helm with instrumentation visor, electronics mounting surface, fold out fiberglass foot rest/standing platform and safety lanyard
• Teleflex tilt sport helm
• 316L stainless steel steering wheel with textured grip and control knob
• 12V switch panel
• Single windshield wiper with washer control
• Port and starboard windshield wiper with washer control
• Compass
• Trim tab control panel and indicator
• Waterproof stereo remote
• 316L stainless steel grab rail
• One 12V outlet (1) and dual USB charger (1)
• Helm fire extinguisher

Electrical Systems

• UL® rated fully tinned, color coded copper wire
• custom built, heat sealed, mechanically crimped, color coded battery cables
• Custom built, one piece electrical harness with water proof connectors and chafe protection
• Powder coated, aluminum, screen printed (front and back) main breaker panels
• Bonding system: thru hull fittings below water line, trim tabs, zinc anode and garboard drain
• 120V 30 amp 60 cycle dockside power connection
• 120V 30 amp 50’ dockside power cord
• Three 120V outlets with GFI protection (3)
• Three 12V outlets (3) and two dual USB chargers (2)
• One 40 AMP battery charger for house, electronics and bow thruster
• One 20 AMP battery charger for engine cranking batteries
• Five battery system: port engine (1) starboard engine (1), AGM house (1), AGM bow thruster (1), and AGM electronics (1)
• One grounding bus bar
• Electronics fuse block
• Isolation transformer

Mechanical Space

• Molded interior white gel coat
• Molded hatch with gasket and stainless steel gas spring
• Molded bilge sump area
• Two 1500 GPH bilge pumps with one automatic float switch, one high water float switch and alarm with stainless steel clad composite thru hull fittings
• Fresh water pump with filter
• Raw water pump with bronze sea strainer, sea cock and thru hull fitting
• Livewell cyclone pump with bronze sea strainer
• Fishbox evacuation pump with dedicated valves

Fuel System

• 316L stainless steel extension arms for remote hullside ball valve operation
• EPA Compliant lined 300 gallon rotomolded fuel tanks with engine pickups, shutoff valves and digital level indicator.
• Custom built fuel lines with mechanically crimped fittings
• Two Yamaha® water separating fuel filters with primer bulbs

Water System

• 30 gallon water tank
• Custom built reinforced color coded water hose
• Pressure sensing pump
• Dockside fresh water inlet with pressure regulator
• 120V/60 cycle 6 gallon stainless steel hot water heater
• Cockpit shower with hot/cold mixing valve