37 Beneteau 2007 Boat for Sale

I : 44.72 ft

J : 13.91 ft

P : 41.01 ft

E : 14.44 ft

Working Sail Area : 716.02 sq ft

- PERFORMANCE PACK -

• Fully battened performance mainsail with roller cars.
• Foam-luffed genoa (thicker mid-luff for improved furling and to compensate for sail belly when partly furled) + anti-UV strips.
• Low stretch halyards.
• H43.2STC genoa sheet winches in place of H46.2STC winches.
• Folding 3-blade propeller.

- YACHT CLUB PACK -

• Wide stainless steel 2-hoop Captain Blue sprayhood (or bimini).
• H40.2STC winch to port in place of H32.2STC
• Hot/cold water cockpit shower.
• Waterproof cockpit speakers.
• GRP cockpit table.
• 1000 W electric windlass.
• Main ground tackle comprising: 16 Kg anchor, 25 m chain, 38 m warp, 4 mooring lines, 6 fenders.

- ELECTRONICS PACK -

• Raymarine ST60 windvane anemometer.
• Raymarine ST60 Tridata (log/speedo/depth sounder, with sensors).
• Raymarine ST6001 autopilot (control head, computer, rudder angle indicator and cable).
• In cockpit on steering wheel console: Raymarine C70 GPS plotter LCD colour 6.5" screen compatible with Navionics Gold cartography (chart excluded).

- NOT INCLUDED IN ELECTRONICS NAV PACK -

• SmartController remote control autopilot/repeater.
• PC interface.

- OTHER OPTIONS AVAILABLE -

• 1000 W electric windlass.
• Open pulpit.
• Teak cockpit/deck.
• Steel blue hull.
• Symmetric/asymmetric spinnaker gear + TD winch.
• Spinnaker pole.
• Detachable staysail chainplate + tack position.
• In-mast furling.
• Coachroof sprayhood.
• Sun awning.
• Bimini.
• Cover for steering wheel/console + table.
• Fresh water foot pump.
• Heating.
• Double berth in saloon.
• Laminated soles.
• 170 L front-opening icebox with refrigeration unit, baskets and shelves (only available in 2-cabin version).
• Teck deck.
• Teck cockpit
• Electric water tank gauge.
• Microwave.
• 3rd battery + power distributor.
• Windex windvane.
• Mosquito screens.

• Pivoting helm seat allows easy access to bathing platform. (B�n�teau patent).
• 2 side cockpit lockers fitted with wood shelves (for liferaft stowage).
• 2 aft cockpit lockers.
• 1 separate, watertight gas locker.
• 2 teak-slatted helm benches at each side of cockpit.
• All cockpit benches are teak-slatted.
• Stainless steel leather trimmed steering wheel.
• A steering wheel console takes navigation instruments. (The instruments are an option.)
• Steering compass on console.
• Control lever to starboard cockpit coaming.
• 12V cigarette lighter socket on console.
• Handrail.
• Cup holder.
• Folding varnished wood cockpit table fixed to steering console.
• Manual bilge pump.

• The joinery is in fruit-tree coloured wood and the varnished "Hydropont" soles have wood strips.

- FORECABIN -

• Headroom: 1.98 m.
• Triangular double berth (2.00 m x 1.45 m x 0.80 m.)
• One 220 V socket.
• Openings and lighting:
• Shelving along the hull.
• Locker with door to port.
• Hanging locker to starboard.
• Plenty of light:
• T40 opening deck hatch with blind.
• Two fixed hull ports (one to each side of the hull).
• Deckhead light with independent switch.
• Two adjustable reading lights.

- SALOON -

• A handrail surrounds the saloon for easier movement.
• Headroom: 2.00 m.
• Saloon with two lengthwise settees:
• Port settee: 2.00 m x 0.52 m.
• Starboard settee: 1.80 m x 0.52 m.
• Settee backrests are sloping for more comfort.
• A central inlaid wood table with bottle holder and folding leaves, surrounded by a moulded wood fiddle, is fixed to the mast support pillar.
• Stowage:
• Shelved stowage with stainless steel retaining bar.
• Stowage unit with door along the hull port and starboard.
• Stowage under port settee.
• Inner hull lining in plain plywood.
• Openings and lighting:
• Two Lewmar T20 opening hatches with blinds.
• Two Lewmar T4 fixed ports with curtains.
• Large panoramic window (1.60 m x 0.40 m) at deck level with rigid blinds.
• Two fixed hull ports (1 on each side).
• Three halogen deckhead lights with independent switches.
• Two bright wall lights on bulkhead.

Electrical panel:

• 12 switch 12 V electrical panel plus 3 x 220 V switches.
• Cigarette lighter socket.
• Double protection to electrical panel, differential circuit breaker and bi-polar temperature magneto for 220 V circuit and 12 V magneto temperature circuit breaker.

Supply:

• The 12 V electrical circuit is supplied by:
• One 110 Amp service battery.
• One 70 Amp engine battery.

Resource management indicators:

• Voltmeter.
• Battery charge warning light.

Battery charging:

• Battery charging by engine alternator or 220 V ? 20 Amp shore supply.

Lights:

• Bow and stern navigation lights.
• Steaming light (masthead light).
• Anchor light.

• Headroom: 1.98 m.
• A functional space:
• Laminated work surface with moulded wood fiddle.
• Stainless steel double sink.
• Mixer tap with hot and cold pressurised water.
• Chopping board.
• Gimballed gas two-burner hob and oven with protective stainless steel safety rail.
• 110 L foam insulated, top-opening, icebox fitted with refrigeration unit and plastic baskets
• Two shelf unit (convertible to refrigerated icebox as an option).
• Seawater foot pump and icebox drainage.
• 220 V socket.
• Ample stowage:
• Stowage with hinged doors under hob.
• Cutlery drawer.
• 4 storage shelves with doors along the hull.
• Unit with 2 shelves (convertible to refrigerator/icebox as option).
• Stowage under sink.
• Waste bin under sink.
• Openings and lighting:
• Striplight over hob.
• 2 deckhead lights: 1 over the sink and 1 above hob.
• T4 opening port with curtains above hob for good ventilation.

• Engine compartment with foam sound-proofing.
• Engine control panel with rev counter and alarms to starboard cockpit coaming.
• Stainless steel propeller shaft with GRP protection moulded into the hull.
• Fixed three-blade propeller.
• Engine mounting built into the inner mould.
• Rotomoulded 125 L diesel tank aft, fitted with electronic gauge.
• Saltwater and diesel filters with sediment reservoirs.

• The hull is single-skinned GRP construction.
• Reinforced points (keel, rudder, chain plates, hull-deck joint) help to strengthen the structure.
• A structural inner moulding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (shroud chainplate tie rods, keel, rudder, etc.), and spreads any loads guaranteeing reduced strain on the hull.
• The surface material of the inner moulding makes cleaning easier and provides a better finish.
• The standard hull is white in colour with blue and silver livery. Steel blue is available as an option.

• The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio and excellent thermal and sound insulation.
• A ?diamond point? non-slip surface increases safety over all areas of movement on deck.