4728JG Boat for Sale

HULL and DECK
•AwlGrip Claret hull color
•White deck with molded Tan nonskid
•Teak cockpit sole  

Construction:
•Infusion Molded (SCRIMP) GRP with biaxial and unidirectional E-glass
•End-grain balsa core
•Vinylester resin gelcoat reinforcing layer
•Molded and tapered single gelcoat bootstripe
•Keel floors, keel sump, engine bed, mast step and longitudinal stringers rnolcled integrally with the hull during SCRIMP process

Deck - Resin-infused (SGRIMP) GRP sandwich structure with biaxial reinforcing fabrics and end grain balsa

Underbody:

Keel

•Fin with integral bulb for low center or gravity- CUSTOM SHOAL DRAFT VERSION WITH WING DESIGN. Draft of 3'11" One-piece lead casting alloyed with antimony bolted to molded keel sump with 304 grade stainless steel bolts

Rudder
•Stainless steel rudder shaft with composite rudder blade
•Rudder blade is elliptical profile, low drag section. balanced spade type
•Low maintenance self-aligning bearings
•Back up tiller

Deck Features:
• (2) Lewrnar deck hatches over forward cabin and main cabin
• Deck hatch over l1eacl compartment
• (4) Stainless steel oval portlights
• Custom stainless steel stemhead fitting
• Teak handrails on cabin house top
• (4) 10" Stainless mooring cleats
• (2) 8'' Stainless steel rnidship mooring cleats
• Companionway sliding hatch with seahood and washboards
• Molded port and starboard lazarette hatches with automatic courtesy lights
•Deck fills for fuel and water tanks
•Holding tank pump put deck plate

Cockpit
The Cockpit has seating for 6 to 8 people with custom cushions and pillows. There is additional seating for 1--2 people behind the helm,

• Edson 336 211T Pedestal Steering
•36" Varnished teak steering wheel
•Sell-draining cockpit with por1 and starboard drains.

COVERS/CANVAS
• Optional Dodger - with leather covered grab handle
•Cockpit Awning
• Full helm cover

ELECTRONICS/NAV Equipment
•Garmin 7610 GPSmap MFD with Radar at helm
•Raymarine ST-60 wind
•Raymarine Tri-Data
•Raymarine ST-6002 AutoPilot
•Clarion AM/FM CD with cockpit controls
•Icorn IC-M-504 w/remote command Mic.
•Ritchie binnacle-mounted compass

INTERIOR ACCOMMODATIONS
• Removable panels with teak trim
• Teak hullsides (option)
• Teak trim throughout (option)
• Bulkheads with teak trim
• Locker interiors/bunk tops and Shelves
• Laminated leak door frames
• Solid teak doors with plywood panels
• Varnished teak and holly cabin sole
• Maroon UltraSuede interior cushions for v-berth, settees and backrests (upgrade options)

Interior Walkthrough
• Forward V-berth w/storage under berth
• Deck hatch
• 4’ Laminated foam cushions
• Overhead lights
• Vinyl head liner
• Teak hullsides (option)

Main Cabin
• Settees port and starboard
• Shelves outboard of settees
• Varnished teak and holly cabin sole with access to bilge
• Teak hull ceiling
• Electrical panels on port side settee

Galley
• Storage lockers outboard
• Origo alcohol Stove
• Isotherm DI 40 DC refrigerator (top loaded)
• Formica counter tops
• Polished stainless sink

Head Compartment
• White molded GRP pan
• Raritan PHIi marine toilet with y-valve
• Polished stainless sink
• Storage lockers outboard
• Locker under vanity
• Mirror
• Deck Hatch

SAILS and RIGGING
Carbon-fiber mast by Hall Spars safety allows the elimination of the backstay, which in turn frees the mainsail for significantly larger size and better aerodynamic shape. Sail control by electric winches enables one person to hoist, reef, trim and lower sail, all from the wheel station.
With the patented Hoyt Jib Boom adding off-wind power, this is a 2 sail, self- tacking rig that projects more sail area than any ordinary rig with a 150% genoa. The payoff is excellent light wind and offwind speed-all easily single-handed. Sail tests indicate speed superior to the competition.

•Electric Harken 44 winches - both are two speed but one is set to be one speed with only one button.
•Rope clutches: Lewmar Superlock
•Hoyt Jib Boom by Hall Spars
•Jib Boom light air extender
•Harken 6:1 Mainsheel traveler track with cockpit control lines
•Cunningham and Quick Vang adjustments lead into cockpit

Mast and Boom
•Carbon mast by Hall Spars
•Carbon fiber gooseneck
•ProFurl in boom mainsail furling system
•Steaming light
• Masthead anchor light
• Moondust Awlgrip finish on boom and mast
• Quik Vang boom vang
• (2) Sets of aluminum spreaders
• Windex

• Navtec Continuous Rod rigging

Running Rigging:
•Tapered spectra main halyard runs below deck to cockpit
•Jib halyard runs below deck
•Mainsheet runs below deck to cockpit
•Jib sheet runs below deck lo cockpit
•Jill fur/er and outhaul lines run below deck to cockpit
•Single line reefing line runs below deck to cockpit
•Mainsheet traveler lines run below deck to cockpit

Sails:
•Doyle Mainsail (for in boom furling), Doyle Jib, plus spare North 3 DL main and jib

ELECTRICAL
•12-VDC System designed to ABYC
•All wiring is tin-plated to inhibit corrosion
•All wiring is coded for ease of Identification
•Bonding system
•DC master panel with analog meter and magnetic circuit breakers
•Battery switch
•(2) 4D Gel cell batteries
• (4) Halogen reading lights
•Overhead lighting in galley and head
•30-amp shore power cord

ENGINE/MECHANICAL
20-HP Yanmar 3YM20C engine with Sail drive:
•2-Blade folding propeller
•GRP engine bed and oil pan
•Through transom wet exhaust
•Waterlock muffler
•Single lever engine control
•Neutral safely switch

Plumbing
•Manually operated bilge pump in cockpit
•Electric bilge pump with float switch
•Oversized cockpit and side deck drains
•Pressurized fresh water system (option)

Tankage:
•18 US Gallon polypropylene fuel tank
•16 US Gallon PVC fresl1 water tank
•1 US Gallon PVC holding tank