- Beam: 18' 3''
- Hull Material: Steel
- Fuel Tank: 2 x 4000|gallon
- Fresh Water: 2 x 500|gallon
- Holding: 1 x 100|gallon
FV JULIA KAE
58’ Steel Marco Seiner | Fully Rebuilt | Turn-Key Commercial Platform
Location: Seattle, Washington
USCG Documentation #: 545462
Service: Coastwise Unrestricted – Commercial Fishing Vessel
Hull Material: Steel
Builder: Marine Construction & Design / Marco (Seattle)
Year Built: 1973
Hailing Port: Seattle, WA
PRINCIPAL DIMENSIONS
Length Overall: 58’
Beam: 18.30’
Hull Depth: 9.30’
Gross Tonnage: 59
Net Tonnage: 40
Fish Hold Capacity: ~80,000 lbs
Hull Number: 234
Call Sign: WDE3589
VESSEL SUMMARY
The FV JULIA KAE is a heavy-built Marco steel seiner that underwent a comprehensive professional rebuild in 2018 at Gardner Boat Repair, with interior, systems, and finishing by Pipes Marine (Seattle).
The rebuild addressed structure, deck, house, machinery support systems, electrical, electronics, insulation, accommodations, hydraulics, and fishing systems, resulting in a modernized, dependable, multi-use commercial vessel suitable for:
Seining
Charter operations
Crab fishing
Tender work
Multi-role fleet use
This vessel has been consistently maintained, recently hauled and painted September 2025, and is ready to work immediately.
HULL & STRUCTUREOriginal Construction
Designed and built by Marine Construction & Design Inc.
Constructed to ABS and USCG hull strength standards
Longitudinally framed steel hull
Boxed keel
Heavy plate construction throughout
Hull Plating
Bottom shell: ¼” plate
Side shell: ¼” plate
Deck plating: ¼” plate
Bulwarks: 5/16” plate
Keel bar: ½” plate
Hold bottom: ¼” plate
Structural Members
Longitudinal hull & deck stiffeners: 3” × 3/8” flat bar
Bulwark caps: rectangular steel tubing
Stern tube: 8” extra heavy pipe
Main deck guard: 6” extra heavy pipe
2018 STRUCTURAL & DECK REBUILD
New steel foredeck plating forward of main fish hold
New transverse framing and longitudinals in rebuilt areas
Raised bulwarks forward of house with stainless cap rail
New stainless pin rails
New stainless skiff guide plate on transom
Stainless rail caps replaced and upgraded
Rolling chocks installed (2012)
HOUSE & SUPERSTRUCTURE
New aluminum house and enclosed flying bridge (2018)
Marine-grade aluminum construction
Installed using explosion-bonded steel-to-aluminum Deta-Couple system
Extensive sound deadening installed during rebuild
Marine-grade laminated plywood interior bulkheads
Hardwood trim throughout
Windows & Doors
All windows upgraded to double-pane Diamond Sea Glaze (August 2022)
Aluminum framed, bolt-in windows with heat-treated glass
Sliding windows port & starboard
Weather-tight aluminum pilothouse and galley doors
MAIN PROPULSIONMain Engine
Caterpillar D343
Inline 6-cylinder diesel
Turbocharged
Runs strong and clean
Proven, mechanical, serviceable platform
Reduction Gear
Twin Disc Model 514
Reduction: 4.5:1
Shafting & Propulsion
3.50” carbon steel intermediate shaft
Babbitted pillow block bearing
4” stainless steel tail shaft
Bronze packing gland with flax packing
3-blade bronze propeller – 54” × 43”
AUXILIARY POWER
Isuzu 4BG1-T diesel auxiliary engine
Installed 2019
4-cylinder diesel
65 kW generator
208V, 3-phase
Electric start
STEERING & CONTROLS
Wagner T-5 hydraulic steering system
Single-plate rudder, palmed
3” rudder stock with pintle
Rudder angle indicators (dual)
Manual helm pump in pilothouse
Engine-driven hydraulic pump
ZF Micro-Commander engine controls
Jastram jog levers (2)
ELECTRICAL SYSTEMSAC Power
Shore power connections:
208V 3-phase
240V single-phase
110V
New AC switchboards and distribution panels
Stranded armored copper wiring throughout
Lock-out bars on AC panels
DC Power
12V & 24V AGM battery banks
Engine start batteries
House batteries
Emergency battery systems
Battery shut-off switches in engine room
Charging & Inverter
OutBack inverter/charger system
Pro-Nautic 24-20 battery charger
Charging from shore power and generator
Lighting
LED lighting throughout vessel (interior & exterior)
LED deck lighting
LED navigation and running lights
Mast-mounted LED work lights
HYDRAULIC SYSTEMS
Aries air clutch off main engine
Marco DP-26 hydraulic pump drive
Stainless steel pressure & return tubing in engine room
New stainless hydraulic valves behind house and on deck
Hydraulic tubing up to knuckle, hoses to power block
Return filter in engine room
AC compressor for clutch operation
DECK MACHINERY & FISHING GEARWinches & Gear
JK FAB self-pursing seine winch
Pullmaster main picking winch
Pullmaster auxiliary picking winch
Pullmaster topping winch
Double-drum vanging winch
Pullmaster picking winches on additional booms
Booms & Rigging
6” steel main boom (new 2018)
Hydraulic knuckle head for power block positioning
Additional steel and aluminum booms
New wire rope rigging, blocks, and shackles
Synthetic running gear
Anchoring
New JK FAB anchor winch (2018)
Forfjord #30 anchor (210 lb)
Stud-link chain and galvanized anchor cable
Stainless anchor roller assembly
REFRIGERATION & FISH HOLDS
30-ton RSW system
Freon compressor in engine room
Titanium tube chiller mounted in forward fish hold
Condenser cooling pump
PVC distribution piping
Fish hold sump system
New under-hold sump line (2023)
Dual insulated fish holds
TANKAGE
Fuel: 4,000 gallons (wing tanks)
Fresh Water: 500 gallons (stainless tanks)
Hydraulic Oil: ~150 gallons
BILGE & PLUMBING
2 × Rule 24V DC bilge pumps
Little Giant AC submersible bilge pump
Emergency bilge suction off main engine
Deck washdown pump
Domestic water pressure system
20-gallon hot water heater
Type III MSD marine sanitation system
NAVIGATION & ELECTRONICS
Furuno NavNet system
Furuno 1935 – 48-mile radar
Furuno NavNet 1943 C-Map radar/chartplotter
GPS & AIS
Furuno FCV-1150 color sounder
Standard Horizon VHF radios (multiple)
Satellite phone (Alaska coverage)
Cell phone booster
CCTV system – 8 cameras
Autopilot (ComNav)
Compass systems
ACCOMMODATIONS & INTERIORCrew & Sleeping
Master stateroom forward with double bunks
Crew quarters with 5 bunks
Storage drawers, lockers, sea rails
Emergency escape hatch
Galley & Living
Full galley with Formica countertops
Electric 4-burner range with oven
Microwave oven
Refrigerator/freezer (double door with lower drawer)
Washer/dryer combo
Head & Shower
Marine head with vanity and sink
Separate shower with mixing valve and drain
SAFETY & COMPLIANCE
USCG dockside exam completed
Life raft with hydrostatic release
EPIRB with hydrostatic release
Fire detection systems
Smoke & heat alarms
General alarm system
Bilge alarms
Watch alarm system
Navigation lights & sound signaling devices
RECENT WORK & MAINTENANCE
Complete rebuild completed 2018
New auxiliary engine installed 2019
Windows upgraded 2022
Fish hold sump line replaced 2023
Hauled & painted September 2025
High level of routine maintenance throughout ownership
OPTIONAL / AVAILABLE SEPARATELY
(Not included in asking price)
19’ × 10’ Marco aluminum skiff
Cummins 6BT – 210 HP
250 fm × 450 md seine
SE seine permit
15” Marco crab block
BOTTOM LINE
The FV JULIA KAE is a serious, steel Marco workboat that has already had the expensive work done. With a modernized house, proven propulsion, heavy deck gear, 30-ton RSW system, and charter-ready accommodations, this vessel offers exceptional value relative to replacement cost.
Turn-key. Proven. Ready to work.
Denison Yachting is pleased to assist you in the purchase of this vessel. This boat is centrally listed by W S Yacht Brokers - Portland.
Denison Yacht Sales offers the details of this yacht in good faith but can’t guarantee the accuracy of this information nor warrant the condition of this boat for sale. This yacht for sale is offered subject to prior sale, price change, or withdrawal from that yacht market without notice. She is offered as a convenience by this yacht broker to its clients and is not intended to convey direct representation of a specific yacht for sale.
Contact our team to schedule a private showing.