42 Invincible 2019 Boat for Sale

• 4 x Mercury 350 Sea Pro outboard motors, 1600 HP
• 2 x Garmin 8617 creating a dual 17” touchscreen display system
• 2 x Garmin external GPS/WAAS antenna for proper vessel position
• Garmin built-in G-2 cartography for the coastal United States and the Bahamas
• Garmin chart reader and software updater module
• Garmin GSD26 high output sonar module
• Garmin 2000-watt CHIRP in hull tank transducer system transducer
• Garmin Seawater temperature sensor
• Garmin GMR1224XHD2 6' 12kW open array radar antenna system with bird finding feature
• Garmin XM Satellite weather system
• 2 x Icom 506 VHF marine radio w/ remote microphone, remote overhead speaker and emergency distress feature
• 2 x 8' Shakespeare 6db high gloss VHF antenna w/ heavy-duty stainless-steel ratchet mount
• Fusion MS UD755 AM/FM stereo w/ built-in iPod docking station and Bluetooth
• Fusion waterproof full remote-control panel for cockpit installation
• Fusion Sirius Satellite radio expansion package with marine antenna
• 4 x pr. JL Audio "M" series 7.1' classic grill white marine speakers in cockpit area
• 2 x JL Audio "M" series 10" classic grill marine sub-woofer
• JL Audio M800/8, 800-watt/ 8 channel amplifier with breakers and heavy-duty cabling as required
• JL Audio M600/J, 600-watt subwoofer amplifier system with breakers and heavy-duty cabling as required
• FLIR M232 thermal imaging camera w/ custom mounting pedestal pan, tilt & zoom interfaced w/ both Garmin 17” MFDs
• GOST NAV Tracker satellite monitoring system with custom on/oft/rest switch and stealth installation
• 2 x USB charging port, one for each side of console
• Garmin factory certified installation with enhanced warranty coverage

• Steering helm
• Engine throttle and shift
• Engine trim and tilt
• Trim tab switches
• Bow thruster joystick (If equipped)
• Windlass control switch (If equipped)
• Stereo control head
• DC switch/breaker panel
• Hydraulic steering system
• Navigation lights: Turns on your Red/Green and White navigation lights
• Anchor light: Turns on your white all-around light used when anchored
• Spreader: Turns on your cockpit flood light (Fwd or Aft)
• Overhead light: Turns on the lights on the bottom of the T-Top
• Bilge pump: Turns on your bilge pump manually - “Auto” is always on
• Macerator: Turns on the diaphragm pump to empty your fish-box overboard
• Baitwell: Turns on the baitwell pump located in the “Pump Box” aft
• Freshwater pump: Turns on your freshwater pump, it is a “demand” pump which provides water when a tap is open
• Saltwater pump: Turns on your saltwater pump, it is a “demand” pump which provides water when a tap is open
• Underwater lights: Turns on your transom mounted underwater lights
• ACC: These switches turn on other accessory features depending on options

Invincible boats are equipped with a sea chest in the aft bilge compartment to consolidate through hull fittings and provide an easier means of replacing pumps. The sea chest includes several fittings and features to make operation of your Invincible simple.

Both the saltwater and freshwater wash-down pumps are in the aft machinery space. They are both demand type pumps which means they can be switched on at the helm but will not start pumping until there is a demand for water such as opening the spigot or faucet. Saltwater is taken from your live-well pump box and fresh water comes from your onboard water tank.

Each baitwell includes 1 filling for each pump, a drain at the bottom of the well, and a pair of drains at the top for the overflow of the well. The fills are aimed at along the tank side to circulate water within the well and keep bait fresh. The number of fills in the well is equal to the number of pumps for that well. Between the pump and the fill is a valve to shut off the hose as mentioned in the sea chest section.

The bilge is the space under the floor and as such is the place any bilge water may accumulate. Your Invincible boat is equipped with three high-capacity electric bilge pumps, two aft in the machinery space and one forward under the console. These are operated manually by pressing the switches labeled Bilge Pump on your helm switch panel or they will automatically pump when sufficient water has accumulated to float the float switch and turn the pump on.

• Bilge drain: The lowest fitting in the center is the screw in drain plug
• Deck scuppers: The two large center thru-hulls which have rubber flaps on them, these have shut off valves on them accessible from the aft machinery hatch
• Live-well drains: The two smaller outboard thru-hulls are the drains for your two live-wells, these also have shut off valves on them
• High-speed pick-up: This tube supplies water to the live-well pump box

• Covers for helm seats and console
• Console and bench seat forward of console
• Corner bench seat covers
• Rear fold out jump seats
• Port and starboard aft corner loungers (removeable)
• Forward U-shape seating (removeable)
• Bahamas shade for aft deck

• Rod holders on side of gunwale
• Livewell seachest with 4 pumps
• Insulated fish boxes
• Electric reel outlets
• Under gunwale gaff holders
• Saltwater and freshwater washdowns