44 Nimbus 2024 Boat for Sale

Key Details

• Displacement: 12,500 kg

• CE Rating: B10 / C12

• Hull Colour: White

• Interior: Nordic Oak with Sunbrella upholstery

Hull Construction

• GRP vacuum-injected hull, deck and superstructure

• Divinycell-cored sandwich laminate for strength, rigidity and insulation

• Shaft-tunnel design for enhanced propeller efficiency, reduced shaft angle and improved low-speed tracking

• Smooth inner-liner and headliner construction for easy maintenance

• Excellent thermal and acoustic performance

Dimensions

• LOA: 13.33 m / 43’9”

• Hull Length: 13.16 m / 43’2”

• Beam: 3.86 m / 12’8”

• Draft: 1.05 m

• Air Draft: 4.23 m

Capacities

• Fuel: 2 × 500 L

• Fresh Water: 2 × 200 L

• Hot Water: 40 L

• Waste Tank: 135 L

• Berths: 6 in 3 cabins

• Heads: 2 (electric freshwater flush)

MachineryEngines

• 2 × Volvo Penta D4-320 (320 hp each) – Shaft Drive

• Hours: ~100

• Last Service: December 2024

• Warranty: Until May 2026

• Volvo Penta Easy Connect (integrates with Simrad)

• Volvo Trip Computer & Depth/Log

• Antifouled: April 2025

Stabilisation & Handling

• Quick MC2 X7 DC Gyro Stabiliser

• Humphree Interceptor X-600 Comfort Package

• Sleipner SE100 Bow Thruster

• Stern Thruster

• Trim Tabs

Exterior Features

• Eco-teak decks (black caulking)

• Foredeck sun cushions

• Teak cockpit table with electric drop to sunpad

• Large aft cockpit canopy

• Windscreen canopy

• Cockpit cushions

• Hot/cold transom shower

• Electric anchor winch (Quick DP2P-1000) with foot controls, 21 kg anchor & 40 m chain

• Hurley davits plus 3 m AB tender with electric outboard

• Interval wipers

• Mooring kit

Interior Features 
General

• Nordic Oak cabinetry & premium joinery

• LED lighting throughout (dimmable zones)

• Sunblind for sliding coupe roof

• Blinds to saloon side windows

• Folding helm footrest

• HPL flooring to cabins & hallway

• Upgraded Nimbus mattresses:

  • Coil master mattress

  • Mattress toppers for master & starboard cabin

Galley

• Gas oven

• Ceramic hob

• Dometic 12 V galley extractor fan

• Primary refrigerator

• Isotherm BI29 L freezer

• Isotherm CR36 L additional fridge

• Nimbus 6-person dinner set

Heating & Systems

• Ebersprächer D6 diesel heating with demisters

• 240 V shore power

• ChargeMaster 12/50 A charger

• Mastervolt galvanic isolator (Mass GI 3.5)

• Isotemp SPA40 L hot water system

Heads

• Two electric flush toilets

• Holding tank with electric discharge

• Separate dedicated shower compartments

Electronics & Navigation

• Navigation lights

• Dual horn

• 2 × Simrad NSS EVO3 12” MFDs with OP50 remote

• Simrad Autopilot NAC2 with OP12 control, RF25 feedback & hydraulic pump

• Simrad RS40 VHF with AIS receiver + HS40 wireless handset

• Simrad AIS NAIS 500 Class-B transceiver

• Volvo Penta data integration

• TV / DVD (22")

• Fusion MS-RA70N stereo with Bluetooth

Accommodation

The Nimbus 405 Coupé offers a welcoming saloon with panoramic visibility, forward-facing seating for guests underway, and a large convertible dinette. Below, three bright cabins comfortably sleep six, centred around a well-appointed master cabin with ensuite. Two heads and separate shower compartments complete the versatile cruising layout.

“We focus on the conscious customer with experience of the sea who requires a large portion of comfort and safety. What is interesting about our coupé concept is that it has such a “well-rounded” quality, where socializing and other on-board activities can be combined with excellent long cruising characteristics. Our coupé boats in particular have enabled us to reach out to both new and younger customers internationally. It has become apparent that our coupé boats are not just for the older generation who prioritize functionality and comfort, but also for families and for younger people who want both fun and to voyage securely and safely,” said Jonas Göthberg, commercial brand manager for Nimbus.

All laminate in the boat is vacuum injected at the Nimbus boatyard in Mariestad, Sweden. Everything from hull, deck, superstructure, interior laminated surfaces and hatches. “Divinycell” is used in the sandwich laminate, providing excellent insulation properties from both heat and cold and transports condensation away very efficiently. “Innerliner” and “headliner” are built entirely of fiberglass. The result is easy-to-clean, smooth surfaces in the stowage lockers, stowage areas, sides and ceiling. The vacuum injection method, in combination with high quality material and multilayer woven fiberglass matting, result in a hull and laminate that is insulated, strong and light.

Polyurethane glued windows in the superstructure and a large wrap around windscreen provide a very contemporary look, exceptional stability and a quiet salon. The helm has been re-modeled, and the instrument panel is now fitted with twin 12-inch plotters. Visibility is exemplary thanks to uncluttered surfaces (nothing gets in the way), matte finish anti-reflecting materials and integrated folding wipers. A large flush-fitted sliding door at the helm and large sliding glass roof with integrated sun blinds maximize visibility even further.

There is seating for four to five facing forward; two seats at the helm and two-three seats at the reversible passenger sofa (the reversible passenger sofa was developed in the seventies for the Nimbus 26 and has been constantly developed and refined ever since).
Much effort has been put in to maximize function and atmosphere of the lighting aboard in both interior and deck areas. LED lighting is used throughout with dimmers for selected areas. In addition is a red navigation lamp at the chart table.

The salon has an open Scandinavian layout with large flat surfaces and is light, airy, roomy and modern, but made cozy at the same time by use of special lighting, wood fittings and attractive seating and cushion covers. The beautifully finished joinery in the salon and cockpit exudes a wonderful feeling of handcraftmanship and quality. The large U-sofa seats 6-8. The dining table folds down into a cocktail table with glass holders, making the salon a prime place for socializing.

Concealed ventilation provides a better interior climate and reduces dampness and humidity thanks to proper air circulation in all cabins.
The modular designed galley (60CC) allows for customized installations such as microwave, electric hob, dishwasher, and choice of ovens (electric or LPG). The galley is also fitted with a fan that can be installed in the upper cupboard above the hob.

The interior of the lower deck is a surprisingly spacious and well-fitted area. The bulkhead is upholstered in light fabric that increases the feeling of space while absorbing sound. There are three double berth cabins, one which is the master cabin with ensuite bathroom, the other two cabins sharing a shower and head. An extra wardrobe is also fitted on the lower deck. Light flows in through the master cabin skylight and provides a feeling of generous space. The light flowing down between the instrument panel and windscreen is a new feature of the 405 and lends the lower deck area additional light and a roomy ambience.

The 405 has a generously sized and comfortable aft deck with an extra-large, L-shaped sofa. The electrically powered folding table converts into a sunbed. The aft deck is level with the swim platform and salon, creating a clean flow of movement.

The large, sturdy bowsprit is combined with a stainless-steel pulpit for safe and easy boarding and/or loading. There is an anchor box hatch in the bow, and at both the bow and stern is an integrated windlass in a stainless-steel frame, which is easy to get at and is an added level of safety.

The drive shaft with tunnel system is a well proven technology and has several advantages. The straighter shaft angle makes for a more efficient power line and thereby lower fuel consumption and more speed. It also allows for better course stability at low speeds and shallower draught.

“Boat Trim System” is standard and functions like trim tabs but with higher efficiency and speed, in addition to being automatic. An upgrade to Humphree Interceptor System is also available.

Automatic mechanical ventilation in the engine room reduces the temperature and extends the life length of the engines, providing the best conditions for problem-free boat ownership.

There is also generously sized, strongly constructed aft stowage which is aluminum lined and fitted behind the engines.

In all, the 405 Coupe is a modern, solid and hyper-functional boat perfect for an uncomplicated and enjoyable life at sea, all with minimal environmental impact."