Finesse Yacht for Sale | 38 Sabre Yachts Manchester, MA

Beam: 12' 8''
Hull Material: Fiberglass
Max Draft: 4' 10''
Displacement: 17,300 lb
Fuel Tank: 1 x 40|gallon
Fresh Water: 2 x 90|gallon
Holding: 1 x 30|gallon

Down the companionway steps from the cockpit is the main cabin with an L-shaped galley to port and opposite to starboard is the nav station and head with stall shower. Forward of the galley to port is the L settee with a bulkhead mounted dining table, and opposite is a straight settee. Forward is the master stateroom with a large v-berth and vanity/sink. The second stateroom is aft of the galley and features a double berth.

The boat's furniture is American cherry, which is varnished and hand rubbed for a satin finish. The ceilings are ash, the overhead is white with cherry strakes, and the sole is teak and holly. Accord shades on all the ports provide privacy when desired. Louvered doors are on most lockers providing good ventilation to storage spaces, and overhead hatches, stainless steel opening ports (7) and fixed ports (4) allow plenty of light. Two large chrome cowl vents add to the ventilation.

Main Cabin:

Convertible L-settee in Navy Ultrasuede with hinged, bulkhead mounted teak dining table to port. There is abundant outboard storage and shelves.
Convertible straight settee in Navy Ultrasuede to starboard with outboard storage.
Aft of the starboard settee is the aft facing nav station with VHF, Clarion stereo, and red/white desk nav light. There is drawer storage for manuals and gear. The nav seat-back folds away to become part of the berth back when not in use, providing a comfortable sea berth.
Aft of the nav station and to starboard of the companionway is the easy-to-access Quiet Flush fresh water head w/ Tank Watch 4 system, and stall shower w/ bi-fold door
Opposite to port is the complete L-shaped galley with a 3 burner propane stove and oven, microwave, and DC refrigeration. The counter top is Corian.

Aft Cabin:

The athwartships berth is 60" X 80"
Large deck hatch over the head of the berth
Cedar lined, lighted, hanging locker
Hella cabin fan

Forward Master Cabin:

Large 6'8" centerline berth
There are 4 large drawers below the berth, a lighted cedar lined hanging locker and additional storage throughout.
There is a sink with vanity mirror on the aft bulkhead of the cabin for convenience
Hella cabin fan

5 Lewmar polished Ocean Series deck hatches with Ocean Air blinds/screens.
2 stainless steel dorade vents.
4 main cabin fixed port lights of Marguard Lexan.
Custom stainless steel opening ports with screens in salon, aft cabin, fwd cabin, and head.
Acrylic sliding companionway hatch with fiberglass spray hood, solid teak hatch boards and screened hatch boards

Hull:

Single unit, hand-laminated E glass, cored with Divinycell closed cell PVC foam .
ISO NPG gelcoat.
Below waterline chopped strand glass and vinylester resin as a back up for ISO NPG gelcoat.
Internal deck to hull joint.
Double boot and single cove stripes.
Bulkheads, berth faces, shelves and floor stringers laminated to hull providing integral, structural strength.
Step transom

Deck:

Single unit, hand-laminated fiberglass with Divinycell core for stiffness, and Divinycell HD core in high stress areas.
The deck is fastened to the hull using stainless steel thru bolts.
3M 5200 Polyurethane sealant in the deck to hull joint.
Propane storage locker in starboard side deck

Deck Hardware:

Inboard and outboard genoa tracks are 1 1/4" x 3/16* x 12' aluminum T-track.
Inboard tracks recessed into the deck tooling.
Outboard tracks supplied with end stops and Lewmar lead
Inboard tracks supplied with end stops and one Lewmar lead block. Swivel block lead to winch.
Custom stainless steel fore, mid-rail and aft corner chocks
Stainless steel cowl vents (2)
Five part main sheet with Lewmar blocks led to Harken recirculating ball bearing cabin top traveler
Mast collar with provision for halyard and turning block attachments
(2) ea 4-bolt cleats w/ fairleads forward, aft and mid ships
Self-draining foredeck divided anchor locker with drain and pad eye for anchor rode w/ freshwater washdown
Lewmar V2 windlass w/ rope chain gypsy
Pulpit, stern rail and stanchions are custom fabricated of stainless steel and thru-bolted with backing plates.
Double lifelines of vinyl coated stainless steel cable with port and starboard boarding gates with braced stanchions.
All lifeline terminals and turnbuckles are swaged stainless steel.
Solid teak toerails.
Stainless steel companionway hand rail and cabin top hand rails

Winches:

All winches are Lewmar "Ocean Series".
Main sheet led to Lewmar 40CST electric two-speed.
Main halyard led to Lewmar #40CST two-speed.
Genoa halyard led to port side #40CST winch.
Jiffy reefing - two lines led through stoppers to cabin top
Primaries - two Lewmar 50 CST self-tailing winches.

Mast and Boom:

Aluminum, keel stepped, mast head Hall Spars mast with Tides mainsail track, double aft swept airfoil spreaders and white powder coat paint finish
Hall Quick Vang led aft to cockpit
Internal main and genoa halyards led aft to cockpit
Internal clew outhaul
External topping lift
Two sets of internal jiffy reefing
Carbon fiber whisker/spinnaker pole
Mast boot to cover exposed spar section in cabin

Chainplates:

Stainless steel, thru-bolted to composite bulkhead structure bonded to the hull. Electrically grounded to keel

Standing Rigging:

Harken electric roller furling headstay (2021)
Navtec hydraulic split backstay adjuster
Rod rigging

Running Rigging:

Color coded lines
Main and Genoa halyard 12mm Polybraid with shackles.
7/16* Dacron braid main sheet
9/16" Dacron braid genoa sheets
3/8" traveler control lines
7/16" jiffy reefing lines

Sails:

Doyle Stratis mainsail w/ Stackpack (2021)
Doyle 135% furling Genoa (2018)

New Hood Canvas Dodger and Bimini w/ zip-on fly (2024)
Custom Navy Blue cockpit cushions w/ white piping
Varnished teak cockpit table w/ drop down leafs
Two deep lazarette storage lockers
Sail locker to starboard
Recessed winch handle pockets
Coamings angled for comfort
Cup holder on pedestal
Two cockpit scuppers to Marelon sea valves
Telescoping transom boarding ladder
Hot and cold transom shower

Edson wheel steering with 40" five spoke Comfort Grip Destroyer wheel, guard and brake
Ritchie SP5 compass mounted in binnacle
New Hood Canvas steering pedestal/wheel cover (2024)
Emergency tiller stored in cockpit locker
Balanced rudder is molded fiberglass bonded to a carbon fiber rudder post passing through a removable UHMW bearing and support tube securely laminated to the hull

Raymarine C95 Chartplotter/Radar at helm in Navpod (2015)
Raymarine AIS (2025)
Raymarine ST6001 Autopilot
Raymarine ST60 speed, wind, depth
Standard Horizon MATRIX VHF radio at nav station
Standard Horizon VHF RAM Mic in cockpit

Four (3 house and 1 engine start) Lifeline AGM batteries with sealed 2 position battery switch
110V shore power system with GFI protection and 50 foot shorepower cord
Prosine 20 inverter/charger
Link 10 battery monitor
Master AC/DC Bass 6200 marine circuit breaker panels (black) located at the chart table, include AC/DC volt and ammeters, and polarity indicator
12V outlet at chart table
Macerator pump on head
Espar diesel heating system
12V Sea Frost refrigeration unit
Microwave oven in galley

Yanmar 40 hp 3JH4E fresh water cooled diesel with reduction gear. Electric shut-off.
Single lever engine control
12-volt 80 amp alternator.
40 gallon custom aluminum fuel tank, deck filled, shut-off valve, vented and grounded.
Racor fuel filter/water separator.
Raw water intake strainer with wrench.
Four point engine mount system optimized to reduce vibration and noise.
Engine compartment exhaust blower.
Engine compartment light.
Complete engine access though sound and heat insulated removable panels.
Tach, hour meter, volt, fuel, oil and temperature gauges are recessed in cockpit face.
1-1/8" prop shaft passes through a glassed-in PYI drip less shaft seal with bronze strut, Max Prop 3-blade feathering propeller