41 Seawind 2019 Boat for Sale

DECK

• Aluminium Hatches & portholes (9 in total)
• 4 x Forward Hatches 470mm x 470mm
• 2 x Mid cabin hatches 470mm x 470mm
• 1 x Port Bathroom window hatch 507mm x 377mm
• 1 x Galley window hatch 507mm x 377mm
• 2 x Aft Cabin window hatch (1 x Port, 1 x Starboard) 507mm x 377mm
• Fibreglass Deck Hatches:
• Forward anchor & storage hatches x 5
• Cockpit storage hatches
• Cockpit Icebox & hatch
• 6 x Docking cleats. Each side: bow, stern & amidships.
• 1 x Heavy duty mooring cleat on forward walkway.
• Ventilation: 2 x forward cabin hatch vents.
• Mast base turning blocks. All halyards & sail controls to cockpit.
• 12 x Rope clutches.
• Manual Sheet winches: 2 x 46ST – 2 speed self tailing& 2 x 40ST – 2 speed self tailing.
• Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines.  700mm high to meet Australian survey requirements..
• 2 x transom access gates with pelican hook releases.
• 2 x side access gates with pelican hook releases.
• Aft swim ladder: folding stainless aft swim ladder

Honu Kai features the popular 3-cabinn layout with spacious queen berths and two heads, both with electric flush toilets and the port aft head has a separate shower. The port hull features a luxurious owner's suite, while the starboard hull offers two private guest cabins. 

The open-concept saloon flows seamlessly into the cockpit with a tri-fold door system, creating one large living space ideal for entertaining.  The interior is elegantly finished with simulated timber floors, soft linings, and a convertible saloon table that drops down to  form an additional berth.  

SALOON

• Timber dining table: Lowers to create coffee table or double bed.
• Upholstered settee with day lounge
• Cocktail cabinet/storage under day lounge
• Timber chart table
• Forward opening windows in 10mm toughened glass in marine anodised aluminium frame. Side windows in 6mm toughened glass.
• Simulated timber flooring.
• Saloon / cockpit doors: Moulded gelcoat tri-fold doors. Complete with folding mechanism for folding into Targa walkway.

SLEEPING CABINS:

• Timber doors on all private cabins.
• Port & Starboard fwd cabins : Each queen sized bed (2050mm x 1540mm)
• Aft Starboard cabin : Double bed (1990mm x 1230mm)
• Mattresses to be 150mm ( 6” ) quilted foam upholstered.
• Cabins lined.
• Recessed 12volt lighting.
• Storage/Cupboards.
• Simulated timber flooring.

PORTHEAD :

• Timber lockable door.
• Manual toilet. Discharge via holding tank.
• Holding tanks built in. Discharge Pump out by shore station or directly overboard. Port 130L and Stb 110L.
• Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water.
• Wall mounted shower head & mixer tap.
• Electric shower bilge pump with direct overboard discharge.
• Large quantity cupboards / shelves to very high quality.
• Toilet roll holder, towel rack & mirror mounted.

STARBOARDHEAD :

• Timber lockable door.
• Manual toilet. Discharge via holding tank.
• Holding tank built in. Discharge Pump out by shore station or directly overboard.
• Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water. Shower head and basin mixer tap with electric shower bilge pump.
• Cupboard/shelves to very high quality.
• Toilet roll holder, towel rack & mirror mounted.

GALLEY

• Spacious galley with co-ordinated Polystone counter surfaces, timber accents.
• Three (3) burner LPG stove. Stainless steel pot holders. Flame failure device to shut off LPG immediately in event of flame going out.
• Double bowl stainless steel sink.
• Pressure hot & cold fresh water system. Single lever mixing tap.
• Refrigerator : Front opening upright fridge 130 litres.
• Under bench storage with timber door fronts & cutlery drawers.
• Inboard side of galley: Over-bench cupboard with sliding door fronts.
• Simulated timber flooring.
• LPG solenoid control in galley.

INTERIOR

• Luxury finish interior.
• Sides and cabin top lined with vinyl or moulded gelcoat.
• Floors: Common area soles simulated timber.

ELECTRONICS & NAVIGATION

Honu Kai is loaded with premium electronics including:

• B&G NSS9 evo3S MFD with US C-MAP Charts

• B&G Broadband 4G Radar

• B&G AIS NSPL-500 / NAIS-500

• B&G NAC-3 Autopilot with Triton2 Display & Controller

• Precision-9 Compass

• WS310 Wired Wind Sensor

• (2) B&G Triton2 Digital Displays

• Depth/Speed/Temp DST-810

• VHF Marine Radio (B&G V50)

• Fusion stereo system with indoor/outdoor speakers

• Mastervolt CZone EasyView 5

ENGINES

• Twin Yanmar 29hp saildrive diesel engines. Fresh water cooling, rubber isolation mounts on reinforced fibreglass bed with integral oil drip pan.
• Two bladed folding propellers.
• Fuel tanks: Total 440 litres (98 gallons) in two survey approved pressure tested aluminium tanks. Fuel gauges fitted.
• Water intakes for engines protected by external strainer. ( 1 per engine)
• Twin primary Racor ( or similar) water separator / fuel filters, secondary engine fuel filters. Engine, fuel tank & fuel line installation to Australian standards.
• Console mounted engine instruments with electric tachometers, engine monitoring & warning systems, engine hour meters.

ELECTRICAL

• High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display.
• Marine grade tinned electrical wiring with extensive use of heat sealed connectors..
• Batteries x 3 comprising: House System (400 amp hrs) : 2 x 200 amp hr AGM (Absorbed Glass Matt) deep cycle / heavy duty batteries. One engine cranking battery – 700 CCA AGM.
• 230amp heavy duty isolation switch.
• BEP Battery Monitor
• 12 V lighting : Numerous 12V LED interior lamps and courtesy lights throughout including recessed lights in cockpit. Dome lights in cockpit. (All lights except fluros are LED)
• 4 x 12V Outlets.
• Survey approved LED navigation lights. Port & Starboard mounted on bow rails.
• Deck floodlight mounted on spreaders.
• Mast head anchor / riding light.
• 2x 125w Solar Panels and 40amp regulator.

MAST, BOOM, SAILS

• Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig.
• Standing Rigging – Forestay 3/8 (10mm) 1 x 19 Dieform wire.

–  Sidestays 3/8 (10mm) 1 x 19 Dieform wire

–  Diamonds 5/16 (8mm) 1 x 19 Dieform wire.

All fitted with turnbuckles and T-ball end fittings.

• Halyards – Main halyard:  12 mm Spectra rope : Heavy duty shackle.

– Genoa halyard:  8 mm Spectra rope. Heavy duty shackle.

– Topping lift:  10 mm rope, Heavy duty shackle.

– Spinnaker Halyard:  12mm rope with snap-shackle spliced to end.

• Boom outhaul.
• 2 x mainsail single line reefing fitted.
• All halyards, reefing lines to be lead back to cockpit through turning blocks, rope clutches.
• Mast adjustable ball bearing batten car.
• Cruising mainsail cover with integrated lazy jack system.
• Self-tacking headsail. Curved headsail traveller track with end stops. Control sheet to cockpit.
• Furling jib with Profurl C420
• Upgraded 2024 laminate mainsail (66 sqm)
• Screecher (64 sqm) on furler

• AIR CONDITIONER COMPACT i16 VSD (115V)

• 800W solar array with 60A MPPT controller

• 2 x MLI Ultra 12/5000W Lithium Batteries

• Mastervolt 2500W Inverter/Charger

• Watermaker: Spectra Cape Horn Xtreme with Z-ION

• Saltwater washdown system

• 40L Hot Water Heater

• Outdoor built-in stainless grill

• Electric anchor windlass (Lewmar H2 Horizontal)

• Mantus 45lb anchor with 165’ chain + 85’ rode

• Lightning protection system with grounded mast

• Assorted spares and original equipment manuals

• Engine-driven high-output alternators (2 x 14/120 Alpha Compact)

• Built-in dinghy davits

• Twin transom access gates

• Swim ladder and large trampolines forward