37 Beneteau 2018 Boat for Sale

• Alpi Blond Oak interior wood
• Parquet type laminated floors
• Fabric lined hull in main saloon and forecabin
• Wood slats under mattresses in both berths
• Ample storage throughout

FORWARD CABIN

Headroom: 6’5’’

• Double access door
• Central double bed (4’11’’ x 6’10’’ x 3’7’’)
• 1 Hanging locker (To starboard)
• 1 Cupboard with shelves (To port)
• Valet tray - Open shelving - Drawer under the bed
• 1 Opening deck hatch with mosquito blind
• 2 Hull portholes with curtain
• 4 Reading lights

PORT AFT CABIN

Headroom: 6’1’’

• Dimensions - Berth : 5’5’’ x 7’2’’ x 6’9’’
• 1 Hanging locker
• 2 Reading lights
• 1 Overhead light
• Open shelving
• Deck house opening porthole

AFT STARBOARD HEAD AND SEPARATE SHOWER ROOM COMPARTMENTS
Headroom: 6’2’’

• Access through saloon
• 1 Basin, 1 Mixing tap hot/cold water, Shower
• Quiet flush electric toilet (fresh water)
• Head cabinet, 1 Mirror, Toilet accessories, Peg
• 1 Overhead light
• 1 Opening portlight with curtains in side windows in the coaming
• Separate shower in an adjacent room with its own privacy door

MAIN SALOON

• Full hull width saloon
• Bench seat on port and starboard sides
• Large saloon table with 2 leaves and bottle rack
• Retractable chart table on starboard side
• Starboard bench seat has an extension cushion for use as a berth
• LED TV on articulated wall mount for ease of viewing in the forward berth and main saloon

• 26 Gal cool box
• Microwave
• LPG 2-burner stove with oven and custom cutting board
• Plenty of storage above and below countertops
• Single stainless steel sink

• 4G Radar
• Additional B&G chart plotter at starboard helm
• Additional B&G Triton display at port helm
• Added USB charging outlet to port helm
• B&G AC42 autopilot + Control at steering station
• B&G V50 VHF, AIS receiver function
• AIS 400
• ForwardScan Sensor (Forward underwater vision)

• 12 V circuit
• Victron deep cycle AGM batteries for engine start, house, and bow thruster (2025)
• Victron Smart Battery Monitor (2025)
• Victron MPPT controllers for solar panels (2025)
• Inverter
• Mast-mounted deck light
• Galvanic Isolator
• Black water holding tank sensor
• Mast mounted TV antenna/receiver
• 4 fans, 2 in each cabin
• 1 Power distributor
• 12 V electrical panel
• 1 12 V Socket
• LED navigation lights: 1 Navigation light - 1 Engine navigation light - 1 Anchor light on masthead
• Wire runs for options cables
• 120V AC circuit, 2 30-Amp shore power inlets, 1 for house, 1 for air conditioners
• 2 Air conditioning units

• Engine Yanmar Diesel 30 hp / 30 HP Sail Drive
• Engine control - Control panel in cockpit
• Engine compartment: Soundproofing foam - Ventilation: 2 Air intakes and 1 powered air expulsion
• 1 Alternator - 12 V / 125 Ah
• 1 Rotomoulded diesel tank 34 US Gal - Gauge at the chart table - 1 Deck filler
• Filters: Sea water - Diesel - Water separator
• Fixed three blades propeller
• 1 Engine access through companionway - 3 access to engine by the sides of the companionway

• 1 Fuel Tank, 34 gallons
• 2 Water Tanks, 1 aft, 34 gallons, 1 extra forward, 20 gallons
• 1 Holding Tank, 21 gallons
• 1 Hot Water Tank, 7 gallons
• Gas cylinder locker - starboard aft cockpit (10’’ x 1’’ x 15’’) - Regulator and safety tap

• 1 rotomoulded freshwater tank (130 L / 34 US Gal)
• 1 Deck filler
• Water unit
• 1 Rigid 80 L / 21 US Gal black water holding tank for each WC
• Electric pump & Shower draining
• 1 Electric bilge pump & 1 Manual bilge pump
• Water heater (25 L / 7 US Gal) - engine start (220 V)

• Full custom screen cockpit enclosure (2025)
• Bimini/Dodger/Connector (2025)
• Custom wheel covers (2025)
• Cockpit seat cushions
• Varnished teak fold down leaf cockpit table
• Cockpit fixed portholes for the aft cabin
• Cockpit opening porthole for aft cabin
• Bow thruster
• Windlass control in cockpit with chain counter (fixed)
• Shore freshwater supply
• Outboard engine 
• Complete mooring kit
• Solar Panels (2024)
• Upgraded anchor to Ultra stainless steel anchor

MOORING LINES - MOORING

• Self-bailing chain locker - Clench bolt - Hatch cover
• Single stem roller
• 6 Aluminium mooring cleats - Stainless steel deck line protection

SAFETY ON DECK

• 1 Open stainless steel forward pulpit, 2 Stainless steel pushpits
• 1 Lifebuoys support bracket
• Double guardrail and stainless steel stanchions
• Openings in guardrail to port and starboard
• Ring for flag welded on pushpit

COCKPIT

• Self-draining cockpit
• 1 Cockpit locker
• 2 Lockers in cockpit bottom - Side helm's seats
• 1 Liferaft locker - aft cockipt (3’1’’ x 1’11’’ x 1’2’’)
• Natural solid wood slatted cockpit benches (5’7’’ x 1’8’’)
• 2 Steering wheel consoles: Stainless steel steering wheels - 2’7’’ - Leather covered - Steering gear at the helm station - metal cable transmission system - Stainless steel handrail - navigation instrument support - Cup holders
• 2 Steering compass
• 2 Deck access points to tiller system
• 1 Emergency tiller
• Portside engine control and control panel
• 2 Hinged PMMA companionway doors - Sliding hatch made of PMMA
• 1 Swimming ladder

SWIM DECK / STERN DECK (Exclusive Trim level)

• Fully opening transom, convertible to bathing platform (8’6’’ x 2’4’’)
• Gas strut opening (manual), 1 Stainless steel integrated telescopic swimming ladder

• In-mast furling mainsail
• Self-tacking Jib with UV protective strip
• Code 0 Sail with Harken roller furler

• Standard mast 9/10 anodized aluminium installed on the deck, 2 aft-swept spreaders
• Anodised aluminium boom
• Discontinuous stainless steel standing rigging
• 1 Backstay
• Rigid boom vang with tackle
• Genoa furling system with drum on the deck
• 2 Genoa tracks with piston adjusted traveller cars
• 2 Genoa sheet return stainless steel fairleads
• Rigging run back to cockpit (except boom topping lift)
• Spare halyard
• Flag halyards
• Complete running rigging: Main halyard, genoa halyard with clutch on mast and cleat, Boom topping lift with cleat on mast, Mainsheet, 2 Genoa sheets, 2 Automatic reefing system
• 4 clutches, 4 Jamming cleats

• 2 Self-tailing genoa sheet winches (H40.2 STA)
• 1 Coach roof winch self tailing (H35.2 STA)
• 1 Aluminium "Speed Grip" winch handle, 1 Winch handle box

• Built at the Beneteau Factory in Marion, SC, USA
• Design in accordance with European Directive requirements and according to CE certification
• Monolithic hull design in polyester
• Monolithic structural inner moulding bonded to the hull
• Deck injection constructed in glass fibre and Saerform foam sandwich, covered with "diamond-point" non-slip coating
• Hull-deck join screwed, bonded and trimmed with 1 bulwark
• Cast iron keel fixed with bolts and stainless steel backing plates
• Underhung rudder with stainless steel stock
• White colored hull - Grey metal hull graphics