50 Custom 1999 Boat for Sale

• Welded aluminum (5086 Alloy) throughout to heavy scantlings; built to Coast Guard Commercial Certification specs.
• Hard chine, full skeg with protected propellor and rudder
• Heavy Duty rub rails
• Naiad Active Fin stabilizers, Recently Resealed by Naiad
• SeaDek on aft Deck area.

• John Deere Model 6076 300 Hp diesel
• Aquadrive thrust bearing with cushioned engine mounts for maximum noise and vibration reduction
• 3 Blade 30" propellor
• Cruises at 8.5 knots @ 1600 RPM's + 1.5 MPG, 1500 mile range
• Max 10 knots @ 2200 RPM
• C. 300 hours on engine approx. SMOH

• 8 KW Northern Lights, 750 hours
• 110V, 30 amp + 50 amp shore power connections
• Two house battery banks for 12V or 24 V service
• 2 x 12V batteries for 24 volt engine start
• 12V generator start battery
• 60amp alternator on main engine
• The generator is generally not used while cruising until the second day on anchor
• Large, heavily insulated 110V refrigeration system with freezer
• Generator or shore power can be run through the inverter for maximum efficiency 
• MarineAir AC/Heat throughout vessel  ( 2 Units )
• Battery monitor system

Divided chain locker forward
Owners cabin forward with queen size double to starboard. Extensive storage in many drawers, lockers and shelves.
Owners head is forward with manual head, vanity, sink, shower with sump & pump. Pilothouse berth can accommodate one.

Moving aft to starboard is the guest stateroom with double berth outboard, an upper
Athwartship berth above, which quickly folds away, a ships office desk is aft with bookshelves, lockers and drawers throughout.

The guest head is opposite with shower stall, vanity, marine head and storage

The washer and dryer are built-in next aft to port

The galley is just forward of the main saloon. Large U-shaped galley with extensive Corian countertops. 4 Burner Force 10 propane stove with oven and broiler. Large custom 110V Cold Plate refrigeration system with heavily insulated box, freezer and thermometers. Double s/s sinks; pressure water system with accumulator tank Extensive storage for long term cruising

The main saloon features and L-Shaped settee with cocktail table opposite. Double doors open to the covered aft deck, creating and attractive open space which flows easily from indoors to outdoors; this is an important advantage over most trawlers.

The full width pilothouse is up three steps from the saloon; and features excellent storage for many charts, logs, books, etc. A full array of navigational electronics are suspended from the overhead. Custom made varnished teak wheel on centerline. Port and starboard doors give easy access to the deck from line handling, etc. Athwartship pilot berth with storage under

The Vessels interior is nicely finished in varnished American Cherry with raised panel cabinetry throughout; cabin soles are varnished long leaf yellow pine. Her interior spaces are covered and cooled/heated by Marine Air units. A hurricane diesel heater provides effective, economical heat in cooler climates.

FLYBRIDGE
This Vessel is nearly always operated from the pilothouse but the large flybridge offers full engine controls and bow and stern thrusters. A hand-held autopilot remote is stored on bridge, there is built in seating for many guests and the tabernacle stepped mast can be lowered from the bridge for 14’ bridge clearance. Large Deck area aft of Flybridge seating and Controls.

• Lofrans reversing windlass with large bow rollers
• 60 LB CLAW anchor with 200 Heavy 1/2 chain on bow roller
• Large pilothouse mounted Search light
• Windshield wipers
• Teak swim platform with transom door.
• Extensive spare parts
• House top storage for tender to 14', lifted by mast winch.
• Heavy duty rubrail surrounds the hull for protection from pilings, etc.
• Large Removable Aft Flybridge Awning
• Electric Davit system on transom for RIB/Tender
• Hinged Mast for Low Bridges

Vessel was custom designed by John Gilbert of Boston who is best known for his commercial work with ferries, party and fishing boats; her structural aluminum work was done to heavy commercial standards using the best available alloys by Winninghoff boats of Rowley, Ma. She was built for a very knowledgeable owner who had owned a fleet of commercial vessels.

Her interior was completed to high yacht standards by Mountain Boatworks of Pocasset, MA and her systems were designed and completed by an extremely talented local marine engineer.

Vessel combines the best of strong, low maintenance commercial grade construction system and with warm and pleasant interior accommodations for two couples or the cruising family.

“Roving C's” unusual design, strong construction, Naiad stabilizers, large fuel capacity and redundant systems invite offshore passage to areas less traveled; she is intended to be independent of shore side facilities as much as her owner’s desire.

“Roving C's” is highly recommended to those who seek rugged distinctive, low maintenance, economical trawler for extended cruising and living aboard.

2 Large Updated RAYMARINE color screens in Pilothouse

Furuno Radar and Raymarine Radar

BOW and STERN Thruster Joystick controls

2 Marine VHF Radios

RAYMARINE Hydraulic AutoPilot and Robertson Backup Autopilot

RAYMARINE Nightvision camera

• Micro Commander Electronics shift and throttle control
• Backup manual controls
• Depth Gauge, Datamarime