45 Seawind 2027 Boat for Sale

Finish:  Full female molded hulls & decks, exterior gelcoat finish with molded-in non-slip surface on deck areas.

Hull Laminate: Vinyl Ester (Modified epoxy) resin laminate of the hulls between the gelcoat and the foam core. Polyester resin elsewhere. Laminate specifications are to Australian survey compliant and international standards including European CE certification.

• Clear anodized aluminum mast and boom. Single Spreader,  7/8 rig.
• Standing Rigging   - Forestay 1/2" (12mm) 1 x 19 Dieform wire
•   Sidestays 1/2" (12mm) 1 x 19 Dieform wire 
•   Diamonds 5/16 (8mm) 1 x 19 Dieform wire.                   

             All fitted with turnbuckles and T-ball end fittings.

• Halyards   
•   - Main halyard:  12 mm Spectra rope : Heavy duty shackle
• . Genoa halyard: 10 mm Spectra rope. Heavy duty shackle.
• Topping lift:  10 mm double braid, Heavy duty shackle.
• Spinnaker Halyard:  12mm double braid with snap-shackle spliced to end.
• Screecher Halyard: 12mm Spectra rope: 2:1 purchase with heavy duty block
•   3 x mainsail single line reefing fitted.                                                               
• Main halyard, topping lift and reefing lines to be lead back to cockpit through turning blocks  and rope clutches.
• Fully battened mainsail – Fiberglass sail battens.
• Mast adjustable ball bearing batten car.
• Cruising mainsail cover with integrated lazy jack system.
• Self-tacking headsail. Curved headsail traveler track with end stops. Control sheet to cockpit.
• Headsail furler.

• 
  
  • Aluminum Hatches & portholes (9 in total)
  • 4 x Forward Hatches 470mm x 470mm
  • 2 x Mid cabin hatches 470mm x 470mm
  • 1 x Port Bathroom window hatch 507mm x 377mm
  • 1 x Galley window hatch 507mm x 377mm
  • 2 x Aft Cabin window hatch (1 x Port, 1 x Starboard) 507mm x 377mm
• Forward anchor & storage hatches x 6
• Cockpit Icebox & hatch x1
• 6 x Docking cleats. Each side: bow, stern & amidships.
• 1 x Heavy duty mooring cleat on forward walkway.
• Ventilation: 2 x forward cabin hatch vents.
• Mast base turning blocks. All halyards & sail controls to cockpit.
• 12 x Rope clutches.
•  Manual Sheet winches: 4 x 50ST – 2 speed self-tailing.
• Stanchions/Rails:  High quality stanchions, bow rails and stern rails with 3 life-lines.  700mm high surpassing international CE requirements.
• 2 x transom access gates with pelican hook releases.
• 2 x side access gates with pelican hook releases.
• Aft swim ladder: folding stainless aft swim ladder. 

• Forward beam section 125 x 3mm.

Adjustable pelican striker and cable.

• 2 x Anchor roller under deck.  Permanent stowage position for 55lb CQR anchor. 
• Catwalk in foam-sandwich fiberglass.
• Plastic coated open weave offshore trampolines.

• Molded fiberglass Targa Bar with curved mainsheet track.
• Dinghy davits shall be fitted.

• Twin raised helm stations (dual)
• 2 X 32” composite steering wheels.
•  2 X 39” composite steering wheels. • Cable and tie rod linkage with both wheels independently linked to steering system. – system offers back-up redundancy.

• Luxury finish interior.
• Sides and cabin top lined with vinyl or molded gelcoat.
• Floors: Common area soles simulated timber.

• Timber dining table:  Lowers to create coffee table or double bed.
• Upholstered settee with day lounge
• Cocktail cabinet/storage under day lounge
• Timber chart table
• Forward opening windows in 10mm toughened glass in marine anodized aluminum frame. Side windows in 10mm toughened glass.
• Simulated timber flooring.
• Saloon / cockpit doors:  Molded gelcoat tri-fold doors. Complete with folding mechanism for folding into Targa walkway.

• Spacious galley with coordinated Polystone counter surfaces, timber accents.
• Three (3) burner LPG stove. Stainless steel pot holders. Flame failure device to shut off LPG immediately in event of flame going out.
• Built-in wall oven - LPG with electronic ignition
• Double bowl stainless steel sink.
• Pressure hot & cold fresh water system.  Single lever mixing tap.
• Refrigerator : Front opening upright  fridge 130 liters.
• Under bench storage with timber door fronts & cutlery drawers.
• Inboard side of galley: Over-bench cupboard with sliding door fronts.
• Simulated timber flooring.

LPG solenoid control in galley

• Timber doors on all private cabins.
• Port & Starboard Fwd cabins : Each queen sized bed (2050mm x 1540mm)
• Aft Starboard cabin : Double bed (1990mm x 1230mm)
• Mattresses to be 125mm ( 5” ) quilted foam upholstered.
• Cabins lined.
• Recessed 12volt lighting.
• Storage/Cupboards.
•  1x USB outlet in each cabin.
• 
  

• Timber lockable door. 
•  Electric salt water toilet. Discharge via holding tank.
•  Holding tanks built in. Discharge Pump out by shore station or directly overboard through 120L holding tank.
• Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water.
• Wall mounted shower head & mixer tap.
• Electric shower bilge pump with direct overboard discharge.
• Large quantity cupboards / shelves to very high quality.
• Toilet roll holder, towel rack & mirror mounted.

• Timber lockable door.
•  Electric salt water toilet. Discharge via 100lL holding tank.
• Holding tank built in. Discharge Pump out by shore station or directly overboard.
• Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water. Shower head and basin mixer tap with electric shower bilge pump.
• Cupboard/shelves to very high quality.
• Toilet roll holder, towel rack & mirror mounted.

• High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display.
• Marine grade tinned electrical wiring with extensive use of heat sealed connectors..
• Batteries x 3 comprising: House System (270 amp hrs): 2 x 270 amp hr. (@12v) AGM (Absorbed Glass Matt) deep cycle / heavy duty batteries. One engine cranking battery 130AH – 900 CCA AGM.
• 500amp heavy duty isolation switch.
• BEP Battery Monitor
• 12 V lighting : Numerous 12V LED interior lamps and courtesy lights throughout including recessed lights in cockpit. Dome lights in cockpit. (All lights are LED)
• 5 x 12V Outlets.
• Survey approved LED navigation lights. Port & Starboard mounted on bow rails.
• Deck floodlight mounted on mast.
• Mast head anchor / riding light.
• 2x 200w Solar Panels and 40amp regulator.

• Pressure hot & cold water system. Hot water storage system ( 40 liter / 8.8 gallons) . Hot & cold water to galley and both bathrooms.
• Galley fresh water tap is lever type.
• Fresh water tank: 700 liters (156 gallons). Remote deck filler.
• Electric fresh water pump.
• Electric bilge pumps (2) with controls integral with master battery switch panel. Float Switches (2).
• Manual bilge pumps (2) in each hull.
• Marlon through-hull fittings to CE international standard.
• Electric toilets in each head.
• Port and Starboard bathroom with separate shower stall.
• Electric sump pump for shower drain.
• 2 x LPG bottles – 4.5kg galvanized.
• Fresh water tank gauge.

• Twin Yanmar 40hp saildrives diesel engines. Fresh water cooling, rubber isolation mounts on reinforced fiberglass bed with integral oil drip pan.
• Two bladed folding propellers.
• Fuel tanks: Total 600 liters (155 gallons) in two CE approved pressure tested polyethylene welded tanks. Fuel gauges fitted.
• Water intakes for engines protected by external strainer. ( 1 per engine)
• Primary Racor water separator / fuel filters, secondary engine fuel filters. Engine, fuel tank & fuel line installation to CE standards.
• Console mounted engine instruments with electric tachometers, engine monitoring & warning systems, engine hour meters.

• Steering compass.
• DSC VHF radio.

• Electric anchor winch with chain & gypsy. Located under locker to give clean deck. Primary anchor is 55 lb. CQR type with 55 mtrs x 8mm short link galvanized chain.
• Primary anchor is stored in a specially designed anchor roller under the forward beam.
•  Anchor winch has wired remote at the winch plus a remote up / down control at the helm station.
• 4 x PVC Inflatable Fenders
• 4 x Mooring lines (each 15 meters x 14mm).

• Epoxy barrier coat plus 2 coats of high quality Latex antifouling bottom paint.
• Seawind 1370 decals on each hull and stern.

DISCLAIMER : The Specifications above may change at Seawind Catamaran’s discretion.