AEGEAN 66M Yacht for Sale

217' Aegean Yacht | 2028 | $23,500,000 Watch Price

118 views

Contact Broker Watch Price

1/14

Last updated May 6, 2026

Aegean 66m Yacht | 217' Aegean Yacht 2028

Denison Yachting is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Northrop and Johnson. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel

Denison Yacht Sales offers the details of this yacht in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of this boat for sale. A yacht buyer should instruct his yacht broker, or his boat surveyors, to investigate such details as the buyer desires validated. This yacht for sale is offered subject to prior sale, price change, or withdrawal without notice. This boat may be listed with another yacht broker.

INQUIRE ABOUT AEGEAN 66M

Have questions about this yacht? Fill out the form below and our team of experts will contact you soon.

Sending your Message. Please wait . . .

Your privacy is important to us. Find out how we protect it. Privacy Policy

Aegean 66m HIGHLIGHTS

Yacht Details: 217' Aegean Yacht 2028
Location: FL
Engines: 2 x 0.00hp
Last Updated: May 6, 2026
Asking Price: $23,500,000
Maximum Speed: 0 Knots
Max Draft: 11' 0''
Stock Number: 85ee4541-e8b0-f011-bbd3-6045bd00fa31

Aegean 66m additional information

Specifications

Cruising Speed: 11 Knots
Maximum Speed: 0 Knots
Beam: 39' 0''
Hull Material: Steel
Max Draft: 11' 0''
Cabins: 8

Hull, Superstructure, Deck Construction And Outfittings

Steel hull construction completed and accepted by Class surveyors (RINA), including ndt and ultrasound checks and tank tests, only several outfitting hot works remaining on hull.
The construction of the aluminum superstructure including hardtop, has been completed.

Steel And Aluminum Outfitting

All manholes have been manufactured and installed. All soft patches for main engines, gensets, bow thruster, etc. have been produced and installed.

All tank fittings are installed, and pressure tests of all tanks have been performed and accepted by Class Surveyor.
All watertight doors under main deck purchased and welded. All porthole frames have been manufactured and welded.
A60 doors at the garage area are installed.
All freeing ports have been installed. The steel and aluminum surfaces on superstructure sides in the windows areas determined and constructed
All hatches have been purchased and the hot works for the openings are completed.
The elevator box, its platform & the main stairs have been constructed. Additionally, the steel boxes, for the side boarding ladders are also constructed.
Anti – rust treatment necessary at certain locations.
The aluminum structure construction of the following areas has been completed.
Main & Upper deck seating groups, Pool & pool area,
Storage places front of the Wheelhouse,
Store places on the upper deck aft bulwarks,
Wing stations
Fresh Air Units’ boxes
Stainless steel windlass trays, chain pipes and anchor plates have been produced and installed. The installation of additional plates around anchor plates has started. Stainless steel fairleads have been completed and installed in the bow area and amidship.
Dumbwaiter cut-out has been completed on both decks.
The construction of additional frame supports under gen-sets has been completed in accordance with Notilus Design's Drawings.
Exhaust outlets for engines and gensets have been produced and welded onto the shell, ultrasound checks have been performed and approved by RINA
The installations of wheelhouse floor gratings are completed.
The foundation for the SOLAS crane has been welded on deck.
A60 doors for the guest areas have been purchased, stored in shed and hot works for the door openings are completed.
Stern, Tender garage & jet-ski garage doors have arrived, and the required checks have been conducted with the Surveyor and Manufacturer. The drawing for additional supports has been done and approved by RINA. The installations of these doors including tender garage, jet ski garage doors and the stern door are now complete.
Pantograph doors have been ordered from Bofor and the hot works of their openings have been completed.

Some of the other remaining outfitting works are;

Equipment Foundations
Garage & Beach Drainage System
Cable Tray Lines and penetrations for both High and Low Voltage
Galley Ventilation Updates
Remaining Scuppers & Storage Drains
Pool Piping System Works
Ventilation Grill Structures
Ship's Name Arrangement
Filling Station
Shore Connection Box
Lifebuoy Arrangement
Tank deck area, technical room and engine room floor foundations and plates
All A type remarks related works
Tender Garage & Jetski Garage crane foundation

Painting And Fairing

All surfaces must be checked and painted with anti – rust primer.
All tanks have been sandblasted. Fresh water tanks, grey and black water tanks, bilge and sludge tanks have been epoxy painted according to the instructions of the paint manufacturer, TEKNOMARIN.
Additionally, all steel areas inside the hull have been sandblasted and painted with epoxy primer to a 200 microns dry film thickness also following the instructions of TEKNOMARIN.
Sandblasting and priming works on the outside hull surfaces including under water area, above water line area, main deck (all steel parts) and aluminum areas on the superstructure, upper deck & sun decks have all been finished.
Epoxy filler application to fair the surfaces has been started. Nearly, all of the hull, excluding, aft area starting behind the ER fwd bulkhead to the stern are filled. The same job on the superstructure has also been completed. Filler
Filler applied on the openings of the pantograph doors area to facilitate work on the templates. The manufacturing of the templates is completed, and they have been sent to the manufacturer; they are under production

Heat, Vibration And Sound Insulation

U profile installation works, for sandwich panel walls on tank deck area, have been completed. Rockwool insulation works commenced prior to the panel installation. Insulation pins have been stud welded on all steel areas. Rockwool insulation sheets have been installed on some areas on the tank deck and lower deck.
Bi-metal insulation pins stud welding works inside both galleys are finished, and the process has started on the surfaces of the galley walls.
All aluminum interior areas have been sandblasted, and insulation pin stud welding has been installed on these surfaces. All these areas have already been painted. All paint work must be inspected and repainted where necessary.
A60 insulation has been completed in ECR and the switchboard is installed
Wall panel frames have been manufactured, and the panels are temporarily installed. Some penetration drawings are needed to complete this work on ECR
Damping plates have been applied on engine room front bulkhead in lower deck and whole main salon floor (engine room ceiling) and air ventilation channel on Main Deck and bow thruster tunnel and around.

Interior Construction, Furniture And Accessories

Crew cabin partitions and raw wood furniture construction works are completed on the lower Deck. All this furniture has been dismantled & stored. But, since a long time has passed, the bare wood and plywood furniture have deformed and will need to be remade.
The dunnage material for lower deck and main deck floor has been imported and stored in the shipyard along with some ply-wood and bare partitions.

General Manufactered Outfittings

Deck Doors & Locker Doors

All deck doors have been purchased. However the pantograph doors have not yet been delivered from Bofor. The inox doors, purchased from Tecnoinox and the hinged doors for the upper deck and main deck, purchased from Cosmo, have not been installed.

Glasses

Need to be purchased.

Deck Hatches

All purchased except new requirements for stern door access hatches. These two need to be ordered.

Watertight / Fire Tight Doors

Interior fire doors purchased from AP Marine have not been installed.
Frames for watertight doors on bulkheads have been installed and hinged watertight doors purchased from Cosmo are installed.

Transom / Shell Doors

All shell door frames have been welded with doors onto the hull, but the installation works, including hydraulic and electric components have not started yet.

Elevator

One passenger lift ordered from Bertazzoni / Italy (Needs confirmation)

Dumbwaiter

One dumbwaiter ordered from Bertazzoni / Italy (Needs confirmation)

Windlass

Two DATA DZC 5000-2 Electrical Windlasses are stored at the Shipyard. Stainless Steel Windlass base was done.

Chain Roller, Stopper

2 x Stored at the Shipyard.

Mooring Capstan

Two DATA DHC 7000 Electrical Capstans are stored in the Shipyard.
Their foundations have been completed on board.

Anchor & Chain

18 pieces of 24mm Chains (each 27.5m), 18 pieces of 24mm Grade3 connection shackles, 2 pieces of anchor shackles and Swivel all
Galvanized and Grade3 and two 520 kgs HHP Stainless Steel Anchors are stored in the Shipyard.

Cranes

Need to be purchased.

Passarelle (Gangway)

Motomar hydraulic gangway has been installed on board. But the installation of hpu, hydraulic and electric works have not started.

Side Boarding Ladders

Two Motomar hydraulic gangways are purchased, %70 of the installation of the port side Ladder has been completed, starboard side not started. Installation of hpu, hydraulic and electric works have not been started.

Windlass Seats

Welded on place.

Mooring Bollards

Purchased and welded on places.

Fairleads

Purchased and welded on places.

Dorades, Cowl Vents, Mushroom Vents

No action has been taken.

Ventilation grills / Dehumidifiers

No action has been taken.

Guard Rails

No action has been taken.

Pulpit and Stern Rails

No action has been taken.

Handrails

No action has been taken.

Anchor Plate

Started but not completed.

Chain Locker

Only foundations were welded.

Mooring Lines

Need to be purchased

Fenders

Need to be purchased

Horn System

Kahlenberg T-3A horn system has been purchased and is stored in the Shipyard.

Flag Pole & Halyards

Only the pole base has been welded.

Deck Jacuzzi / Pool

Ordered from Water and Wellness Co. Italy

Wipers

8 pieces Exalto wipers with wipers and washing jet nozzles have been purchased.

Helmsman Seat

Need to be purchased.

Sign Writings

No action has been taken.

Diving Compressor

No action has been taken.

Dinghy and Outboards

No action has been taken.

Jet Skis, Sport & Diving Equipment, toys

No action has been taken.

Draft Marks

No action has been taken.

Freeboard Marks

No action has been taken.

Boat Cradle

No action has been taken.

Telescopic Mast

Purchased from AMS, stored in the Shipyard. Foundation and deck penetration has been done.

Cathodic protection

Cathelco Antifouling & ICCP system purchased and stored in the shipyard. Electrode flanges are installed to water strainer boxes and cell covers are installed on the hull bottom.

Engine Room, Propulsion And Control Systems

Engines

2 x MTU 16V4000M63R Engines are on foundations, have not been fixed yet, final arrangement should be done at sea. Last preservation works has been done for both main engines and gear boxes by MTU service on 25.08.2021. Need report from MTU.

Propeller

2x Fixed pitch 1800 mm diameter 5 blade Propellers were purchased from Otto Piening stored at the yard.

Shaft System

Otto Piening stainless steel shafts and their system including stern tubes, aft shaft struts, net cutter and earthing devices were purchased.
Stern Tubes and Aft Shaft Struts has been installed and welded. NDT performed and approved by Class surveyor.
Bearings on stern tubes (both inner and outer) and aft struts have been installed and ready for chock fast operation.

Engine Exhaust System

Purchased from Soundown. Installed on board but some parts were removed for other hotworks in the ER.

Exhaust insulation

No action has been taken.

Transmission

2xZF 9311 i:4.522 gear boxes were purchased with MTU Engines.

Gensets

2x420 kW + 1x250 kW + 1x120 kW (as emergency) Liag– Lindenberg gensets have been installed on board.

Genset company does not exist anymore.

Gensets preservation works were done on 12 – 14.10.2021.

Genset Exhaust System

Purchased from Soundown with Zenoro Sooth filters for service gensets. Installed on board, but some parts were removed for other hotworks in the ER.

Hydraulic Steering System

DATA DDS 2x1500 Electrohydraulic Steering system was purchased.
Steering Gear installation is done on board.

Rudder Blades

Rudder tubes have been installed and welded. Twin rudder shafts and blades have been installed.

Bow Thruster

Schottel 200 kW Electrical thruster has been installed. Protection grills are also produced.

Stabilizer

4 fins Quantum zero speed stabilizer welding bushings have been installed on board. Hull Units also dismantled and re-assembled in compartment & HP Units are taken to the boat. Installation needs to be completed.

Guard & Hand Rails

No action has been taken.

Floors

No action has been taken.

Drip Pans

No action has been taken.

Workbench

No action has been taken.

Pumps, Fans, Boilers And Water Systems

Fire Pump

1x Azcue CA-65/20 stored in the Shipyard.

Emergency Fire & Bilge Pump

1x Azcue CA-65/20 stored in the Shipyard.

Main Bilge Pump

1x Azcue CA-80/15A stored in the Shipyard.

Direct Bilge Pump

1x Azcue CA-50/7A stored in the Shipyard.

Bilge Alarm Switch

Need to be purchased.

Submersible Bilge Pump

Need to be purchased.

Bilge Pump Automatic Start Switches

Need to be purchased.

Deck Wash Pump

1x Azcue SP-MO-31/20 stored in the Shipyard.

Fresh Water Pressure Pump

2x Azcue SP-MR-41/30 stored in the Shipyard. Including system control panel with frequency control panel.

Pressure Tank

1x Azcue HMT6/8-H24L stored in the Shipyard.

Black Water Discharge Pump

1x Azcue CA-50/4A stored in the Shipyard.

Grey Water Discharge Pump

1x Azcue CA-50/4A stored in the Shipyard.

Fuel Transfer Pump

2x Azcue BT-IL52D4-F stored in the Shipyard.

Fuel Hand Pump

Need to purchase.

Lubrication Oil Pump

1x Azcue BT-HM32D-F stored in the Shipyard.

Dirty Oil Pump

1x Azcue BT-HM32D4 stored in the Shipyard.

Hot Water Circulation Pump

Need to be purchased.

Sea Water Cooling Pumps

1x Azcue LN-40/125 for ER Cooler, 1x Azcue CP-25/130 for EC Unit Cooler and 1x Azcue CA-40/1B for EDG Exhaust Cooler stored in the Shipyard.

Engine Room Fans

Including H/H package, stored in the Shipyard

Fire Dampers for Fans

Including H/H package, stored in the Shipyard

Boilers Need to be purchased.

Air Condition and Ventilation Units
Central Chiller Unit of AC system and fresh air & exhaust air system ordered to Heinen & Hopman, stored in the Shipyard.

Fresh Water Maker

Two 800 lt/h capacity, each, Tecnicomar S 3/44 units are stored in the Shipyard.

UV Filter

1x Tecnicomar UV20/SD/EPM stored in the Shipyard.

Sand Filter

2x TCC/1 remineralising filters stored in the Shipyard.

Strainer

2x TFD filters stored in the Shipyard.

Sewage Treatment System

14.500 lt/day capacity Tecnicomar Ecomar 145 S unit stored onboard.
Upgrade kits also stored in the shipyard.

Toilet System

Vacuum System order cancelled by Jets.

Fuel Separators

Alfa Laval MAB 103 stored in the Shipyard

Bilge Separator

RWO OWS-COM 0.5 stored in the Shipyard

Air Compressor

Need to be purchased.

Tanks, Piping And Plumbing

Bilge & Fire System

65% of metal pipe laying work has been done. No valves installed or purchased.

Fresh & Hot Water System

80% of pipe laying in crew area completed, there is no work done in other areas.

Black & Grey Water System

Only tank fittings and tank connection and some part of PPRC piping in the crew area have been done.

Seawater System

Only main seachest collector has been done.

Air Conditioning System

Air condition cold water piping also started on tank deck and lower deck.

Tank Ventilation System

60% of metal pipe laying work has been done. No valves installed or purchased.

Air Ventilation System

Fresh air and exhaust air spiro piping works already started and all lines installed on tank deck, lower deck main and upper deck.
MD guest area Exhaust units are installed on place. Planum boxes and distribution lines temporary installations are done.
They will be aligned and permanently installed.

Lube Oil System

No action has been taken.

Air Pressure System

No action has been taken.

Deck Scuppers and Drainage System

60% of metal pipe laying work has been done.

Tank Level Gauges

No action has been taken.

Hydraulic Systems

No action has been taken.

Electrical

Cable Penetration and Trays

70% of the High Voltage cable penetrations and Trays are completed. Due to limited space, caused by the ceiling heights in the guest areas, additional cable trays have been purchased and new & wider cable trays are being installed to accommodate the ceiling heights. However, no action has been taken for Low Voltage cable penetrations and trays.

Cable Pulling

Cable pulling has been started at the crew area and on tank deck.

Switchboards (AC/DC/EMG)

Main AC/DC & Emergency Switchboards have been produced. Main switchboards are installed in ECR. For the distribution Switchboards, only the cabinet of the crew area distribution board has been purchased and installed in its place. No any action has been taken for the others.

Transformers Service & Emergency

Transformers, Galley & Laundry Transformer and Shore Power Transformer have been purchased. Only Shore power transformer has been installed on board.

Start Panels (Pumps, Fans, Nav Lights, etc)

No action has been taken.

Batteries

The batteries for gensets which came with the units have all expired and need to be replaced. No action has been taken for the others.

Battery Insulator

No action taken.

Battery Chargers

Chargers for the gensets’ batteries came with the units. No action has been taken for the others.

Battery Master Switch

No action has been taken.

Inverter

No action has been taken.

Converter

No action has been taken.

Electronic Cables

No action has been taken.

Shore Cable, Sockets

No action has been taken.

Switches & Plugs

No action has been taken.

Dashboards

No action has been taken.

Interior Lights

Ordered from Cantalupi.

Exterior Lights

Ordered from Neo Light. Pay & acquire the goods.

Decorative Lights

No action has been taken.

Emergency Lights

No action has been taken.

Underwater Lights

28 pieces three colored LED underwater lights along with their DMX drivers have been purchased and are currently stored in the Shipyard; the installation of the flanges has been completed.

Navigation Lights

No action has been taken.

Search Lights

2x Sanshin HRX-150 with remote control panel have been purchased and stored in the Shipyard.

Dimmer Modules

No action has been taken.

ER, Bilge and Technical Area Lights

No action has been taken.

Materials used inside switchboards

No action has been taken.

General Electric materials

No action has been taken.

Other Consumables

No action has been taken.

Alarm Monitoring System

Ordered from ECR

Power Management System (Paralleling System)

System module has been installed in the Main

Switchboard.

No action taken for other works.

Electric Plans

Some plans have been drawn up by Can Makina Elektrik Company and approved by the Class. Need to make agreement for the remaining plans and calculations.

Subcontractor

Delmar Marin Elektrik Company has started but need to make a new agreement.

Mast

Aluminum mast construction has been completed and stored in the Shipyard.

Safety Systems And Equipment

ER Fixed Fire Fighting System

Ordered watermist system from Ultrafog/M-Fire

Springler / Water Mist System

Ordered watermist system from Ultrafog/M-Fire. Ultrafog high pressure fire-fighting system’s piping works have been started and main lines have been installed on tank deck and lower deck. Updated drawings are pending from Ultrafog to re-start piping on the other decks.

Fire Alarm and Monitoring System

Ordered from M-Fire

Mobile Fire Extinguishing Equipment

Ordered from M-Fire

Fire Hydrants, hoses and Nozzles

Ordered from M-Fire

Liferafts

No action has been taken.

Hydrostatic Release

No action has been taken.

Life Buoys

No action has been taken.

Life Jackets

No action has been taken.

Line Throwing Gun

No action has been taken.

Man Overboard

No action has been taken.

Aldis

No action has been taken.

Charts

No action has been taken.

Books

No action has been taken.

Immersion Suits

No action has been taken.

Medical Supplies

No action has been taken.

Harnes eyes and Jackstays

No action has been taken.

Fog Horn

No action has been taken.

Solas Posters

No action has been taken.

IMO Signs

No action has been taken.

Radar Reflector

No action has been taken.

Emergency Escape Ladder

No action has been taken.

Pyrotecnics

No action has been taken.

Epirb and Sart

No action has been taken.

Klinometer

No action has been taken.

Binocular

No action has been taken.

Electronics And Navigation

This system has been ordered from Promar including S Band and X Band Radars, Synapsis integrated Bridge system with 5 pcs 26” monitors, Autopilot System, Gyro & Magnetic Compass System, BNWAS System, D-GPS Navigator, AIS, Wind, VHF & MF/HP Radiotelephones, Inmarsat, Navtex, GMDSS Safet Equipment, Portable VHFs, Echosounder, Speed Log, Intercom System, Public Announce System, TVSAT and VSAT Systems, Fleet Broadband and their cables and components.
No action has been taken for cable pulling of this system.

Hi Fi And Tv Systems

This system has been ordered from Lotusconcept including TVs and Satellite Receivers, Loudspeakers and Subwoofers, Av receivers and amplifiers, Crestron equipment, Apple and Launchport Products, Network System, CCTV System, PABX Systems and their cables and components.
Cable pulling of the system is also ordered from this the company.

Awning And Upholstsery

Sun Awning System has been ordered from Reckman covering Main Deck, Upper Deck Aft and Sun Deck Aft. Negotiate with Reckman, pay and acquire goods.
Their deck sockets have arrived and welded on their places onboard.